Socket Weld End Ball Valve

  • Home /
  • Socket Weld End Ball Valve
Socket Weld End Ball Valve

Material

Stainless Steel 304, 316, CS, Brass, Duplex, Monel, Inconel,
Hastelloy, Titanium & all Other Alloys

Seat

15% glass reinforced RTFE

Component Material

Stem packing: 15% glass reinforced RTFE

Size

 Upto 4"

Port

Full

Length

7.3"

Pressure Rating

Upto 3000 PSI at 65°F (18°C)

Maximum Temperature

400°F (204°C)

Flow

1-Way

 

  1. Full port, 1/4"~4" (DN8~DN100)
  2. W. P.: 3000 WOG
  3. W. T.:-20℃ ~200℃ (-4℉~392℉)
  4. Bar Stock & Investment casting
  5. Blow-out proof stem
  6. Live-loading design
  7. Anti-static device
  8. Locking device
  9. ISO 5211 Direct Mounting pad
  10. Length conform to DIN 3202/4-M3
  11. ISO 15848 fugitive emission approved (option)
  12. Automation accessories (option)
  13. Socket weld ends conform to ANSI B16.11 & DIN 3239 part2

 

ITEM PARTS MATERIAL
1 BODY ASTM A351-CF8M ASTM A216-WCB
2 CAP
3 BALL ASTM A351-CF8M
4 STEM ASTM A276-316
5 SEAT PTFE / RTFE
6 SEAL PTFE
7 THRUST WASHER
8 PACKING
9 O-RING VITON
10 BELLEVILLE WASHER AISI 304
11 HANDLE STAINLESS STEEL
12 STEM NUT AISI 304
13 LOCKING PAD
14 GLAND RING
15 LOCKING WASHER
16 BOLT
17 NUT
18 SPRING WASHER
19 HANDLE SLEEVE PVC


DN d d1 D L L1 H H1 H2 H3 W S A D1 D2 D3 R1 R2 ISO 5211 Torquo(N-M)
8 8 14.4 22 55 11 63 8 40.3 6.5 120 9 42 31 36 42 2.75 2.75 F03/F04 3.6
10 10 17.9 22 60 11 63 8 40.3 6.5 120 9 42 31 36 42 2.75 2.75 F03/F04 3.6
15 15 22 29 75 10 63 8 40.3 6.5 120 9 42 31 36 42 2.75 2.75 F03/F04 3.6
20 20 27.5 35 80 13 69 9 45 6.5 120 9 42 31 36 42 2.75 2.75 F03/F04 6.1
25 25 34.2 42 90 13 76 10 47.5 7.5 148 11 50 35.5 42 50 2.75 3.5 F04/F05 9.9
32 32 43 52 110 13 84 11 55.5 7.5 148 11 50 35.5 42 50 2.75 3.5 F04/F05 15.6
40 38 49 62 120 13 99 12 65.3 9 178 14 70 56 50 70 3.5 4.5 F05/F07 22
50 50 61 75 140 16 108 12 73 9 178 14 70 56 50 70 3.5 4.5 F05/F07 26.8

 

NPS d d1 D L L1 H H1 H2 H3 W S A D1 D2 D3 R1 R2 ISO 5211 Torquo(N-M)
1/4" 0.31 0.57 0.87 2.17 0.43 2.48 0.31 1.59 0.26 4.72 0.35 1.65 1.22 1.42 1.65 0.11 0.11 F03/F04 31.9
3/8" 0.39 0.7 0.87 2.36 0.43 2.48 0.31 1.59 0.26 4.72 0.35 1.65 1.22 1.42 1.65 0.11 0.11 F03/F04 31.9
1/2" 0.59 0.87 1.14 2.95 0.39 2.48 0.31 1.59 0.26 4.72 0.35 1.65 1.22 1.42 1.65 0.11 0.11 F03/F04 31.9
3/4" 0.79 1.08 1.38 3.15 0.51 2.72 0.35 1.77 0.26 4.72 0.35 1.65 1.22 1.42 1.65 0.11 0.11 F03/F04 54
1" 0.98 1.35 1.65 3.54 0.51 2.99 0.39 1.87 0.3 5.83 0.43 1.97 1.4 1.65 1.97 0.11 0.14 F04/F05 87.6
1-1/4" 1.26 1.69 2.05 4.33 0.51 3.31 0.43 2.19 0.3 5.83 0.43 1.97 1.4 1.65 1.97 0.11 0.14 F04/F05 138.1
1-1/2" 1.5 1.93 2.44 4.72 0.51 3.9 0.47 2.57 0.35 7.01 0.55 2.76 2.2 1.97 2.76 0.14 0.18 F05/F07 194.7
2" 1.97 2.4 2.95 5.51 0.63 4.25 0.47 2.87 0.35 7.01 0.55 2.76 2.2 1.97 2.76 0.14 0.18 F05/F07 237.2

 

 

  • Flanged Valve End Connections – These are one of the easiest connections to be installed or uninstalled from a pipeline. 
  • Threaded Valve End Connections – These types of end connections are suitable for low pressure piping systems. These are affordable and ensure quick assembly to the users, without any difficulty. In some cases, these connections may be welded around the joint, once they are assembled.
  • Socket Weld Valve End Connections – These types of connections are socketed so as to have a plain spigot end of the pipe. These are used on valves that are made up of steel, and for such applications that require higher pressure and/or higher temperature in pipelines that do not necessitate repeated disassembling.
  • Butt Weld Valve End Connections – These types of end connections are manufactured in such a manner that each end of the valve is bevelled to match with the thickness and bevel on the pipe.   After this, the two ends are butted to the pipeline and are welded.