Threaded Pipe Fittings
- Home /
- Threaded Pipe Fittings
Threaded Pipe Nipple For Plumbing Manufacturer in india with size range 1/8" TO 4" or custom
The length of the Close Nipple is usually specified by the overall length with thread. When the Closed Nipple Fittings size is of two different sizes it is called reducers. Threadolet is a type of self reinforced branch fittings and connects directly to equipment with male or female threads. Hex Bushing is usually used to reduce the size of the female thread. A threaded Pipe Cap is used to protecting the ends of various devices and is used in plumbing apparatus of industrial, commercial, and domestic water supply lines. Galvanized Pipe Fittings No Thread requires couplings to connect them. it creates a sealed joint. It is important to consider the type of couplings used so that the pipe is leak free. Most of the Threaded Couplings are the ones that are preferred.
Straight Pipe Thread Fittings tend to leak if there is no sealing mechanism beside the tapered end. Thread Reducer may be affected by a change in temperature and may lead to leakage. Npt Fitting helps in making the seal tighter and more efficient. Adapters are used to terminate or extend pipes. Male Adapter Plumbing is used on one side of the pipe. Whereas the other side is equipped with Female Adapter Plumbing. They need to be soldered or welded on the smaller pipe. Hex Pipe Plumbing is a method in which hex shaped screws and bolts are fixed. The shape of the pipe, screw, and nuts is hexagonal. We produce a variety of Nipple For Plumbing and supply them at an affordable cost
Table of Content
Closed Nipple Fittings Suppliers in Mumbai, Call for small piece of Threaded Pipe Cap/Coupling/Reducer to test before buying
Specification Chart Threaded Fittings
| BRAND NAME | TU-LOK |
| THREADED PIPE FITTINGS SIZE | 1/8" TO 4" |
| THREAD | NPT, BSPP, BSPT, METRIC, UNF |
| END CONNECTION | THREADED, BUTT WELD, SOCKET WELD |
| PRESSURE RATING | 1500 PSI, 3000 PSI, 6000 PSI, 10000 PSI, 15000 PSI, 20000 PSI |
| THREADED PIPE FITTINGS MEDIA | HYDRAULIC OIL, AIR, WATER, GAS, STEAM, HOT WATER , COLD WATER , SEA WATER , CHEMICAL |
| MEDIA TEMPERATURE | (-120* C TO 500*C ) RANGE AS PER PRESSURE |
| THREADED PIPE FITTINGS BODY TYPE | BAR STOCK, FORGED |
| MATERIAL | SS 316, SS 304, BRASS, SS 316 TI, CS, COPPER, SUPER DUPLEX, INCONEL, DUPLEX, HASTELLOY, MONEL, ALLOY 20, SMO 254, 904L, TITANIUM & ALL OTHER ALLOYS |
What is Threaded Pipe Fittings ?
Threaded joints are the oldest form of joints. Pipes that are threaded at the end require fittings that have internal threadings. Threaded Pipe Fittings are used in non-critical applications for instance domestic and commercial water, fire protection, and industrial cooling water system that are low cost. Threaded Pipe Fitting Manufacturers normally produce these fittings in cast gray or malleable iron, cast brass, and bronze or forged alloy and carbon iron. Shoulder Nipple Plumbing is comparatively longer than the close nipples. There is a very small non-threaded place between threaded nipples for plumbing.
Closed Nipple Fittings Price in india
| Threaded Pipe Fittings Description | Threaded Pipe Fittings Price |
| Threaded Pipe Fittings M x F Forged Brass Straight Unions Plumbing | US $ 0.286-0.33 / Piece |
| Stainless Steel Threaded Pipe Fittings Equal Tee |
US $ 0.5-1 / Piece |
| Threaded Forged Pipe Fittings ASME B16.11 Carbon/Stainless Steel 3000#/ 2000# NPT | US $ 1.2-1.6 / Piece |
| Threaded Pipe Fittings - Long Sweep Bend |
US $ 1600-2000 / Ton |
| NPT/BSPT Threaded/Screwed 150lbs Stainless Steel SS304/316 Male Female Pipe Fittings | US $ 0.1-0.3 / Piece |
| Stainless Steel Brass Elbow Male Female Threaded Machining Pipe Fitting |
US $ 1-10 / Piece |
Threaded Pipe Fitting Manufacturer, Readily Available Female To Female and Male To Male Connector Plumbing for immediate Dispatch with NPT, BSPP, BSPT, METRIC, UNF thread
Threaded Pipe Fittings Manufacturer in india
BULKHEAD ADAPTER
FEMALE CROSS
FEMALE ELBOW
FEMALE TEE
HEX ADAPTER
HEX FEMALE COUPLING
MALE ELBOW
MALE TEE
MALE X FEMALE EXPANDER OR REDUCER
REDUCER BUSH
Dimension Chart of Threaded Fittings
Threaded Pipe Nipple for plumbing dimensions
| Size | Threaded Tube DIN2440 | Threaded Tube BS 1387 | Length | |||||||
| O.D. | Wall thickness | O.D. B, mm | Wall thickness S, mm | Parallel nipples | Barrel/Taper nipples | |||||
| DN | inch | B, mm | S, mm | Light | Medium / Heavy | Light | Medium | Heavy | L,mm | L, mm |
| 6 | 1/8 | 10.02 | 2 | 10.02 | 10.02 | 1.06 | 2 | 16 | 30mm – 2500mm | |
| 8 | 1/4 | 13.05 | 2.035 | 13.06 | 13.09 | 1.08 | 2.03 | 2.09 | 18 | 30mm – 2500mm |
| 10 | 3/8 | 17.02 | 2.035 | 17.01 | 17.04 | 1.08 | 2.03 | 2.09 | 22 | 30mm – 2500mm |
| 15 | 1/2 | 21.03 | 2.065 | 21.04 | 21.07 | 2 | 2.06 | 3.02 | 25 | 30mm – 2500mm |
| 20 | 3/4 | 26.09 | 2.065 | 26.09 | 27.02 | 2.03 | 2.06 | 3.02 | 30 | 30mm – 2500mm |
| 25 | 1 | 33.07 | 3.025 | 33.08 | 34.02 | 2.06 | 3.02 | 4 | 35 | 30mm – 2500mm |
| 32 | 1 1/4 | 42.04 | 3.025 | 42.05 | 42.09 | 2.06 | 3.02 | 4 | 38 | 30mm – 2500mm |
| 40 | 1 1/2 | 48.03 | 3.025 | 48.04 | 48.08 | 2.09 | 3.02 | 4 | 38 | 30mm – 2500mm |
| 50 | 2 | 60.03 | 3.065 | 60.02 | 60.08 | 2.09 | 3.06 | 4.05 | 45 | 30mm – 2500mm |
| 65 | 2 1/2 | 76.01 | 3.065 | 76 | 76.06 | 3.02 | 3.06 | 4.05 | 55 | 30mm – 2500mm |
| 80 | 3 | 88.09 | 4.005 | 88.07 | 89.05 | 3.02 | 4 | 5 | 60 | 30mm – 2500mm |
| 100 | 4 | 114.03 | 4.05 | 113.09 | 114.09 | 3.06 | 4.05 | 5.04 | 70 | 30mm – 2500mm |
| 125 | 5 | 139.07 | 4.085 | 139.07 | 5 | 5.04 | 85 | 30mm – 2500mm | ||
| 150 | 6 | 165.01 | 4.085 | 165.01 | 5 | 5.04 | 100 | 30mm – 2500mm | ||
Material of Threaded Steel Pipe Fittings
- Stainless Steel (A-182) Threaded Pipe Fittings
- Alloy Steel (A-182) Threaded Pipe Fittings
- Carbon Steel (A-105) Threaded Pipe Fittings
- Duplex Stainless Steel Threaded Pipe Fittings
- Low Alloy Steel (A-350) Threaded Pipe Fittings
- Copper Nickel Threaded Pipe Fittings
- Brass Threaded Pipe Fittings
Pressure Rating of Threaded Iron Pipe Fittings
|
Class 150 Threaded Pipe Fittings |
Class 300 Threaded Pipe Fittings |
|||||||
|
NPS (Normal Pipe Size) |
||||||||
1/4" - 1" |
11/4 - 2" |
2 1/2 - 3" |
|||||||
Temp °C |
Temp °F |
bar |
PSI |
bar |
PSI |
bar |
PSI |
bar |
PSI |
-29 to 66 |
-20 to 151 |
20.07 |
300.023 |
137.090 |
2000.007 |
103.04 |
1499.069 |
69.00 |
1000.076 |
100 |
212 |
17.05 |
253.082 |
119.060 |
1734.065 |
90.05 |
1312.059 |
61.05 |
891.098 |
125 |
257 |
15.02 |
220.046 |
106.040 |
1543.020 |
81.01 |
1176.026 |
56.01 |
813.066 |
150 |
302 |
12.08 |
185.065 |
93.010 |
1350.030 |
71.08 |
1041.037 |
50.07 |
735.034 |
175 |
347 |
10.05 (See Note) |
152.029 |
79.090 |
1158.085 |
62.05 |
906.049 |
45.02 |
655.057 |
200 |
392 |
… |
… |
66.060 |
965.095 |
53.01 |
770.015 |
39.08 |
577.025 |
225 |
437 |
… |
… |
53.040 |
774.050 |
43.08 |
635.027 |
34.03 |
497.048 |
250 |
482 |
… |
… |
40.010 |
581.060 |
34.05 |
500.038 |
28.09 |
419.016 |
275 |
527 |
… |
… |
26.090 |
390.015 |
25.02 |
365.050 |
23.04 |
339.039 |
288 |
550 |
… |
… |
20.070 |
300.023 |
20.07 |
300.023 |
20.07 |
300.023 |
Threaded Fitting Types, Classes and Sizes
View latest price & ready sizes of Galvanized Pipe Fittings No Thread and Straight Pipe Thread Fittings Ex Mumbai with (-120* C TO 500*C) Media Temperature
NPT Fitting thread chart
| NPS (inch) |
Pitch of Thread, P (inch) |
Threads per Inch (n) |
OD of pipe (mm) |
Pitch of Thread, P (inch) |
OD of pipe (mm) |
NPS (inch) |
Threads per Inch (n) |
|---|---|---|---|---|---|---|---|
| 1/8 | 0.0125 | 27 | 10.03 | 0.003704 | 73 | 2 1/2 | 8 |
| 1/4 | 0.0125 | 18 | 13.07 | 0.005556 | 88.09 | 3 | 8 |
| 3/8 | 0.0125 | 18 | 17.01 | 0.005556 | 101.06 | 3 1/2 | 8 |
| 1/2 | 0.0125 | 14 | 21.03 | 0.007143 | 114.03 | 4 | 8 |
| 3/4 | 0.0125 | 14 | 26.07 | 0.007143 | 141.03 | 5 | 8 |
| 1 | 0.0125 | 11.05 | 33.04 | 0.008696 | 168.03 | 6 | 8 |
| 1 1/4 | 0.0125 | 11.05 | 42.02 | 0.008696 | 219.01 | 8 | 8 |
| 1 1/2 | 0.0125 | 11.05 | 48.03 | 0.008696 | 273 | 10 | 8 |
| 2 | – | 11.05 | 60.03 | 0.008696 | – | – | – |
Threaded Fittings vs Socket Welded Fittings
| Threaded Pipe Fittings | Socket Welded Fittings |
| Threaded Pipe Fittings Strength comparatively less; prone to leakage | More Strength and long lasting connection. |
| Threaded Pipe Fittings is Less reliable | More reliable |
| Threaded Pipe Fittings are screwed into piping or piping components. | Socket welded fittings are joined by fillet welding. |
| Threaded Pipe Fittings Available in pressure class 2000#, 3000# and 6000# | Additional pressure class 90 |
Standards of Threaded Galvanized Pipe Fittings
- ASME B16.4
- MSS-SP-83
- ASME B16.11
- ASME B16.3
- ASME B16.34
- ASME B16.3
Threaded Elbow dimensions
Class 3000
| NPS | Min WT |
Min Length of Thread |
Outside Dia of Band |
Center to End | ||
| G | B | J | D | 90° A |
45° C |
|
| 1/2 | 4.009 | 10.09 | 13.06 | 38 | 33 | 25 |
| 3/4 | 4.032 | 12.07 | 13.09 | 46 | 38 | 28 |
| 1 | 4.098 | 14.07 | 17.03 | 56 | 44 | 33 |
| 1¼ | 5.028 | 17 | 18 | 62 | 51 | 35 |
| 1½ | 5.056 | 17.08 | 18.04 | 75 | 60 | 43 |
| 2 | 7.014 | 19 | 19.02 | 84 | 64 | 44 |
| 2½ | 7.065 | 23.06 | 28.09 | 102 | 83 | 52 |
| 3 | 8.084 | 25.09 | 30.05 | 121 | 95 | 64 |
| 4 | 11.018 | 27.07 | 33 | 152 | 114 | 79 |
Class 6000
| NPS | Min WT |
Min Length of Thread |
Outside Dia of Band |
Center to End | ||
| G | B | J | D | 90° A |
45° C |
|
| 1/2 | 8.015 | 10.09 | 13.06 | 46 | 38 | 28 |
| 3/4 | 8.053 | 12.07 | 13.09 | 56 | 44 | 33 |
| 1 | 9.093 | 14.07 | 17.03 | 62 | 51 | 35 |
| 1¼ | 10.059 | 17 | 18 | 75 | 60 | 43 |
| 1½ | 11.007 | 17.08 | 18.04 | 84 | 64 | 44 |
| 2 | 12.009 | 19 | 19.02 | 102 | 83 | 52 |
| 2½ | 15.029 | 23.06 | 28.09 | 121 | 95 | 64 |
| 3 | 16.064 | 25.09 | 30.05 | 146 | 106 | 79 |
| 4 | 18.067 | 27.07 | 33 | 152 | 114 | 79 |
Advantages and disadvantages
Advantages of Threaded Pipe Fittings are
- Installation is easy, Special installation skill is not required.
- Suitable for low-pressure applications, leakage integrity is good.
- Quick installation.
- Parts can be detached.
- Less force is required for joining.
- Economic as cheaper.
Disadvantages of Threaded Pipe Fittings
- Temperature changes may cause leakage problems.
- Threads may suffer from corrosion in a corrosive environment.
- Not suitable for high temperature-pressure applications.
- Strength is less as compared to welding.
- Fatigue damage can occur for cyclic services.
Threaded Tees & Cross Dimensions
Class 3000
| NPS | Min WT |
Min Length of Thread | Center to End A |
Outside Dia of Band D |
|
| B | J | ||||
| 1/2 | 4.009 | 10.09 | 13.06 | 33 | 38 |
| 3/4 | 4.032 | 12.07 | 13.09 | 38 | 46 |
| 1 | 4.098 | 14.07 | 17.03 | 44 | 56 |
| 1¼ | 5.028 | 17 | 18 | 51 | 62 |
| 1½ | 5.056 | 17.08 | 18.04 | 60 | 75 |
| 2 | 7.014 | 19 | 19.02 | 64 | 84 |
| 2½ | 7.065 | 23.06 | 28.09 | 83 | 102 |
| 3 | 8.084 | 25.09 | 30.05 | 95 | 121 |
| 4 | 11.018 | 27.07 | 33 | 114 | 152 |
Class 6000
| NPS | Min WT |
Min Length of Thread | Outside Dia of Band D |
Center to End A |
|
| B | J | ||||
| 1/2 | 8.015 | 10.09 | 13.06 | 46 | 38 |
| 3/4 | 8.053 | 12.07 | 13.09 | 56 | 44 |
| 1 | 9.093 | 14.07 | 17.03 | 62 | 51 |
| 1¼ | 10.059 | 17 | 18 | 75 | 60 |
| 1½ | 11.007 | 17.08 | 18.04 | 84 | 64 |
| 2 | 12.009 | 19 | 19.02 | 102 | 83 |
| 2½ | 15.029 | 23.06 | 28.09 | 121 | 95 |
| 3 | 16.064 | 25.09 | 30.05 | 146 | 106 |
| 4 | 1 | 27.07 | 33 | 152 | 114 |
BSPP/BSPT thread chart
| BSPP (inch) |
Threads per Inch (n) |
OD of pipe (mm) |
Pitch of Thread, P (inch) |
BSPP (inch) |
Threads per Inch (n) |
OD of pipe (mm) |
Pitch of Thread, P (inch) |
|---|---|---|---|---|---|---|---|
| 1/8 | 28 | 10.02 | 0.0907 | 1 1/2 | 11 | 48.03 | 2.0309 |
| 1/4 | 19 | 13.05 | 0.0337 | 2 | 11 | 60.03 | 2.0309 |
| 3/8 | 19 | 17.02 | 0.0337 | 2 1/2 | 11 | 76.01 | 2.0309 |
| 1/2 | 14 | 21.03 | 1.0814 | 3 | 11 | 88.09 | 2.0309 |
| 3/4 | 14 | 26.09 | 1.0814 | 4 | 11 | 114.03 | 2.0309 |
| 1 | 11 | 33.07 | 2.0309 | 5 | 11 | 139.07 | 2.0309 |
| 1 1/4 | 11 | 42.04 | 2.0309 | 6 | 11 | 168.03 | 2.0309 |
Threaded Brass/ Copper/ Aluminum Pipe Fittings Manufacturer, Npt Fitting can be manufactured as required with short lead time
Uses of Threaded Pipe Nipple
- Threaded Pipe Fittings use in Water Distribution
- Fire Protection
- Threaded Pipe Fittings use in Cooling Systems, etc
Threaded Couplings Dimensions
Class 3000
| NPS | Outside Diameter |
End to End | Minimum Length of Thread |
|
| D | A | B | J | |
| 1/2 | 28 | 48 | 10.09 | 13.06 |
| 3/4 | 35 | 51 | 12.07 | 13.09 |
| 1 | 44 | 60 | 14.07 | 17.03 |
| 1¼ | 57 | 67 | 17 | 18 |
| 1½ | 64 | 79 | 17.08 | 18.04 |
| 2 | 76 | 86 | 19 | 19.02 |
| 2½ | 92 | 92 | 23.06 | 28.09 |
| 3 | 108 | 108 | 25.09 | 30.05 |
| 4 | 140 | 121 | 27.07 | 33 |
Class 6000
| NPS | Outside Diameter |
End to End | Minimum Length of Thread |
|
| D | A | B | J | |
| 1/2 | 38 | 48 | 10.09 | 13.06 |
| 3/4 | 44 | 51 | 12.07 | 13.09 |
| 1 | 57 | 60 | 14.07 | 17.03 |
| 1¼ | 64 | 67 | 17 | 18 |
| 1½ | 76 | 79 | 17.08 | 18.04 |
| 2 | 92 | 86 | 19 | 19.02 |
| 2½ | 108 | 92 | 23.06 | 28.09 |
| 3 | 127 | 108 | 25.09 | 30.05 |
| 4 | 159 | 121 | 27.07 | 33 |
Dimensions Standard Threaded Pipe Cap
Class 3000
| NPS | Outside Diameter | End to End | Minimum End Wall Thickness | Min Length of Thread | |
| D | A | G | B | J | |
| 1/2 | 28 | 32 | 6.04 | 10.09 | 13.06 |
| 3/4 | 35.0 | 37 | 6.04 | 12.07 | 13.09 |
| 1 | 44 | 41 | 9.07 | 14.07 | 17.03 |
| 1¼ | 57 | 44 | 9.07 | 17 | 18 |
| 1½ | 64 | 44 | 11.02 | 17.08 | 18.04 |
| 2 | 76 | 48 | 12.07 | 19 | 19.02 |
| 2½ | 92 | 60 | 15.07 | 23.06 | 28.09 |
| 3 | 108 | 65 | 19 | 25.09 | 30.05 |
| 4 | 140 | 68 | 22.04 | 27.07 | 33 |
Class 6000
| NPS | End to End | Outside Diameter | Minimum End Wall Thickness | Min Length of Thread | |
| A | D | G | B | J | |
| 1/2 | 33 | 38 | 7.09 | 10.09 | 13.06 |
| 3/4 | 38 | 44 | 7.09 | 12.07 | 13.09 |
| 1 | 43 | 57 | 11.02 | 14.07 | 17.03 |
| 1¼ | 46 | 64 | 11.02 | 17 | 18 |
| 1½ | 48 | 76 | 12.07 | 17.08 | 18.04 |
| 2 | 51 | 92 | 15.07 | 19 | 19.02 |
| 2½ | 64 | 108 | 19 | 23.06 | 28.09 |
| 3 | 68 | 127 | 22.04 | 25.09 | 30.05 |
| 4 | 75 | 159 | 28.04 | 27.07 | 33 |
Threaded Plugs Dimensions Schedule
| DIMENSIONS OF THREADED PLUG (BS 3799) (In mm) | ||||||||
| Nominal Pipe Size |
Length (Minimim) A |
|||||||
| Plugs Square Head | Plugs Round Head | Hex Plugs & Bushings | ||||||
| Height of Square (Minimum) B |
Width Flats (Minimum) C |
Nominal Diameter of Head E |
Length (Minimum) D |
Width Flats (Nominal) F |
Hex Height (Min.) | |||
| Bushing G |
Plug H |
|||||||
| 1/8” | 9.7 | 6.6 | 7.1 | 10.4 | 35.1 | 11.2 | – | 6.4 |
| 1/4” | 11.2 | 6.6 | 9.7 | 13.5 | 41.1 | 15.7 | 3.0 | 6.4 |
| 3/8” | 12.7 | 7.9 | 11.2 | 17.5 | 41.1 | 17.5 | 4.1 | 7.9 |
| 1/2” | 14.2 | 9.7 | 14.2 | 21.3 | 44.5 | 22.4 | 4.8 | 7.9 |
| 3/4” | 15.7 | 11.2 | 15.7 | 26.9 | 44.5 | 26.9 | 5.6 | 9.7 |
| 1” | 19.1 | 12.7 | 20.6 | 33.3 | 50.8 | 35.1 | 6.4 | 9.7 |
| 1-1/4” | 20.6 | 14.2 | 23.9 | 42.9 | 50.8 | 44.5 | 7.1 | 14.2 |
| 1-1/2” | 20.6 | 15.7 | 28.4 | 48.5 | 50.8 | 50.8 | 7.9 | 15.7 |
| 2” | 22.4 | 17.5 | 33.3 | 60.5 | 63.5 | 63.5 | 8.6 | 17.5 |
| 2-2/2” | 26.9 | 19.1 | 38.1 | 73.2 | 69.9 | 76.2 | 9.7 | 19.1 |
| 3” | 28.4 | 20.6 | 42.9 | 88.9 | 69.9 | 88.9 | 10.4 | 20.6 |
| 4” | 31.8 | 25.4 | 53.5 | 114.3 | 76.2 | 117.3 | 12.7 | 25.4 |
Threaded Bushing dimensions
| DIMENSIONS OF THREADED BUSHING (BS 3799) (In mm) | ||||||||
| Nominal Pipe Size |
Length (Minimim) A |
|||||||
| Hex Plugs & Bushings | ||||||||
| Width Flats (Nominal) F |
Hex Height (Min.0) | |||||||
| Bushing G |
Plug H |
|||||||
| 1/8” | 9.07 | 11.02 | – | 6.04 | ||||
| 1/4” | 11.02 | 15.07 | 3.00 | 6.04 | ||||
| 3/8” | 12.07 | 17.05 | 4.01 | 7.09 | ||||
| 1/2” | 14.02 | 22.04 | 4.08 | 7.09 | ||||
| 3/4” | 15.07 | 26.09 | 5.06 | 9.07 | ||||
| 1” | 19.01 | 35.01 | 6.04 | 9.07 | ||||
| 1-1/4” | 20.06 | 44.05 | 7.01 | 14.02 | ||||
| 1-1/2” | 20.06 | 50.08 | 7.09 | 15.07 | ||||
| 2” | 22.04 | 63.05 | 8.06 | 17.05 | ||||
| 2-2/2” | 26.09 | 76.02 | 9.07 | 19.01 | ||||
| 3” | 28.04 | 88.09 | 10.04 | 20.06 | ||||
| 4” | 31.08 | 117.03 | 12.07 | 25.04 | ||||
Don't Forget to check our material supplied to Qatar, Malaysia and other countries in Europe and America
| Philippines, Indonesia, Belgium, Dammam -KSA | nipple for plumbing |
| Europe, France, Thailand, Qatar | Shoulder Nipple Plumbing |
| Thailand, Germany, Malaysia, Czechia | Close Nipple |
| Bangladesh, USA, Finland, Malaysia | Threadolet |
| Kuwait, Saudi Arabia (KSA), Brazil, South Africa | Hex Bushing |
| Singapore, South Africa, Singapore, Bahrain | Threaded Pipe Cap |
| UK, Australia, Nigeria, Philippines | Galvanized Pipe Fittings No Thread |
| Hong Kong, Malaysia, UAE, Oman | Straight Pipe Thread Fittings |
| Iran, Italy, Singapore, Chile | Threaded Coupling |
| Norway, Turkey, Malaysia, United Arab Emirates (UAE) | Thread Reducer |
| Russia, Malaysia, Dubai, Netherlands | Npt Fitting |
| Mexico, Spain, UK, Egypt | Male Adapter Plumbing |
Threaded Pipe Nipple Weight Chart
| Nominal Size | Weight/kg | ||
|---|---|---|---|
| DN | NPS | SCH80/ L=100 | SCH160 / L= 100 |
| 6 | 1/8 | 0.05 | – |
| 8 | 1/4 | 0.08 | – |
| 10 | 3/8 | 0.11 | – |
| 15 | 1/2 | 0.16 | 0.2 |
| 20 | 3/4 | 0.22 | 0.3 |
| 25 | 1 | 0.33 | 0.5 |
| 32 | 1 1/4 | 0.45 | 0.6 |
| 40 | 1 1/2 | 0.55 | 0.75 |
| 50 | 2 | 0.76 | 1.1 |
| 65 | 2 1/2 | 1.15 | 1.5 |
| 80 | 3 | 1.55 | 2.2 |
| 100 | 4 | 2.25 | 3.5 |