5 Way Manifold Valve

  • Home /
  • 5 Way Manifold Valve

5 Way Manifold Valve



Supplier of Five way T and H Type Direct Mount Manifold Valve, check 5 valve manifold for differential pressure transmitter Price list

Manifold valves prevent the rise in pressure by distributing the pressure and starting the operation. 5 Way Manifold Valve is an in-place transmitter calibration. It has 2 block valves, 2 equalizers, and 1 vent. 5 way manifold valve manufacturers in India prefer these valves over the 3 way valve. This is because 5 Way T Type Manifold Valve can route a vent tube to a remote location that can be used specifically for hazardous fluids. By connecting the vent line to the calibrating pressure source, one can route the pressure to either side of the transmitter. 

When both the block valves in 5 Way H Type Manifold Valve are open the equalizing valve is not allowed to open. This is because opening the equalizing valve will lead to a transfer of fluid from the high pressure side to the low pressure side. 5 Way Direct Mount Manifold Valve is cheaper and easy to install. It has integrated valves which also provide hard pipe. The 2 isolating valves allow easy removal of the instrument for maintenance and servicing. While the 3 valves on the top of 5 Way Manifold Valve Rosemount assist in accurate field calibration. It is important to note that the equalizing and block valves in the 5 Way Manifold Valve Parker are not opened simultaneously. 

In case there is a dangerous fluid in the Swagelok 5-way Valve Manifold it can reach the transmitter thus causing damage and personal hazard. In normal operation, 5 Way 3 Valve Manifold the equalization and bleed valve is closed while the blocking valves remain open. We produce these Harga 5 Way Valve Manifold using high quality raw material procured from trusted vendors. We also provide Anderson Greenwood 5 Way Valve Manifold that is used for natural gas services.

 

 

buy directly from manufacturer of 5 Way 3 Valve Manifold online and save cost, check 5 Way Manifold Valve Operation and diagram

 

Description Price
Five Way Manifold Valve US $ 110 / Piece
High Quality Instrumentation Stainless Steel Five Way Manifold Valve Blocks US $ 1.5-80 / Piece
Airtac 5/2 Way Solenoid Valve Manifold US $ 10 / Set
5 Way 4V210 Directional Manifold Valve Solenoid Valve US $ 3.75 / Piece
Instrument Types Water Stainless Steel Check 5 Way Manifolds Valve  US $ 120 / Piece
Five-Valve Manifolds, Manifold 5 Way Valve 6000psi SS316 Flange End
US $ 110 / Piece
Stainless Steel 5-Way High Pressure Gas Manifold Valve (AV10060)  US $ 7-15 / Piece

 

5 Way Manifold Valve

 

BRAND NAME TU-LOK
VALVE SIZE 1/8" TO 1" 
THREAD NPT, BSPP, BSPT
CONNECTION THREADED, FLANGE END
TYPE R TYPE, T TYPE, H TYPE
FUNCTION 2 WAY, 3 WAY, 5 WAY
BODY SHAPE SQUARE, RECTANGLE
PRESSURE RATING 1500 PSI, 3000 PSI, 6000 PSI, 10000 PSI, 15,000 PSI
ORIFICE SIZE 2 MM TO 9.5 MM
MEDIA TEMPERATURE (-120* C TO 500*C ) RANGE AS PER PRESSURE
BODY TYPE BAR STOCK, FORGED
HANDLE  BAR T-HANDLE
PACKING DETAILS BOX PACKING, WOODEN PALLET
EQUIVALENT BRANDS SWAGELOK, PARKER, ROSE MOUNT, HAMLET, OLIVER VALVES, HOKE
MATERIAL SS 316, SS 304, SS 316 TI, COPPER, BRASS, DUPLEX, CS, INCONEL, SUPER DUPLEX, HASTELLOY, MONEL, ALLOY 20, SMO 254, 904L, TITANIUM & ALL OTHER ALLOYS

 

We can supply Swagelok 5-way Valve Manifold with customized threads and sizes, view Parker and Rosemount Five way Manifold Connection

 

5 WAY DIRECT MOUNT MANIFOLD VALVE

5 WAY DIRECT MOUNT MANIFOLD VALVE

5 WAY H TYPE MANIFOLD VALVE

5 WAY H TYPE MANIFOLD VALVE

5 WAY R TYPE MANIFOLD

5 WAY R TYPE MANIFOLD

5 WAY T TYPE MANIFOLD VALVE

5 WAY T TYPE MANIFOLD VALVE

5 WAY MANIFOLD VALVE

5 WAY MANIFOLD VALVE

5 WAY 3 VALVE MANIFOLD

5 WAY 3 VALVE MANIFOLD

 

5 Way H Type Manifold Datasheet

 

  1. Check all valves LP, HP, the equalizing valves and the bleed valve are closed.
  2. Open the equalizing valves. This guarantees that the same pressure will be connected to both sides of the transmitter, i.e. zero differential pressure.
  3. slowly Open the High Pressure block valve , from both the high pressure and low-pressure side of the transmitter check for leakage .
  4. Close the equalizing valves. on both sides of the transmitter This locks the pressure.
  5. to establish the working differential pressure and to apply process pressure to the low-pressure side of the transmitter Open the low-pressure block valve.

 

from Service Removing the 5-Valve Manifold DP Transmitter

  1. Close the LP and HP block valves.
  2. Open the equalizing valves.
  3. to vent process pressure to the atmosphere Open the bleed valve

 

Datasheet 5 way Direct Mount Manifold Valve

 

5 Way Manifold Valve Diagram

 

Stockist of Anderson Greenwood 5 Way Valve Manifold with (-120* C TO 500*C ) media temperature as per pressure

 

Remote Mount Five Valve Manifold (Pipe x Pipe)
Part Description Qty. Material
Gland Body 2 SS 316
Body 1 SS 316
Check Nut 2 SS 304
Gland Retainer 2 SS 304
Gland Packing 4 P.T.F.E
Spindle 2 SS 316
Gland Washer 2 SS 304
Gland Ring 2 SS 304
Dust Cap 2 Rubber
Trim 2 SS 316
Grub Screw 2 SS
Handle 2 SS 304
Lock Pin 2 SS 304

 

Datasheet 5 Way R Type Manifold

 

5 Way Manifold Valve Vs 3 Valve Manifold

 

One include that 5-valve manifolds give over 3-valve manifolds is the capacity to course a vent tube to a inaccessible (more secure) area, for utilize with especially unsafe handle fluids. 5-valve manifolds allow for in-place transmitter calibration, given one of the ∆P transmitter’s sides has an climatic vent. By interfacing the calibrating pressure source to the vent line, one can course the calibrating pressure to either side of the transmitter (as it were), whereas keeping the other side vented.

 

5 Way T Type Manifold Datasheet

 

  • Ship building
  • Fats and fertilizer industry
  • Chemicals industry
  • Construction industry

 

Find Harga 5 Way Valve Manifold in 1/8" TO 1" size Range or in custom size

 

Direct Mount T Type Five Valve Manifold (Pipe x Flange)

 

Part Description Qty. Material
Gland Body 5 SS 316
Body 1 SS 316
Check Nut 5 SS 304
Gland Retainer 5 SS 304
Gland Packing 10 P.T.F.E
Spindle 5 SS 316
Gland Washer 5 SS 304
Gland Ring 5 SS 304
Handle 5 SS 304
Dust Cap 5 Rubber
Trim 5 SS 316
Grub Screw 5 SS
Lock Pin 5 SS 304

 

  • All non-wetted parts are 316 stainless steel
  • Non-rotating needle
  • Metal-to-metal secondary needle seal (back seat)
  • Cold rolled external stem threads
  • Blow out proof needle
  • Integral metal-to-metal valve seat

 

Part Description Qty. Material
Gland Body 5 SS 316
Body 1 SS 316
Check Nut 5 SS 304
Gland Retainer 5 SS 304
Gland Packing 10 P.T.F.E
Spindle 5 SS 316
Gland Washer 5 SS 304
Gland Ring 5 SS 304
Dust Cap 5 Rubber
Trim 5 SS 316
Grub Screw 5 SS
Handle 5 SS 304
Lock Pin 5 SS 304

 

  • Spindle Tip : non-rotating tip shut-off type & soft seated.
  • Dust cap : dust cap protects stem threads from external contamination heat code traceability.
  • Spindle : ground and thread rolled. Packing below thread.
  • Bonnet : back seated blow out proof.

 

Coplanar Mount Five Manifold Valve (Pipe x Flange)
Part Description Qty. Material
Gland Body 5 SS 316
Body 1 SS 316
Check Nut 5 SS 304
Gland Retainer 5 SS 304
Gland Packing 10 P.T.F.E
Spindle 5 SS 316
Gland Washer 5 SS 304
Gland Ring 5 SS 304
Dust Cap 5 Rubber
Trim 5 SS 316
Grub Screw 5 SS
Handle 5 SS 304
Lock Pin 5 SS 304

 

Canada, Chile, Iran, Philippines Remote Mount (Pipe x Pipe) Five way isolation Valves
Romania, United Arab Emirates (UAE), Norway, Europe Direct Mount T Type (Pipe x Flange) Five way shutoff valves
Malaysia, Netherlands, Russia, Sweden, Brazil Direct Mount H Type (Flange x Flange) Five way isolation Valves
Los Alamos -Mexico, Egypt, Mexico, Malaysia Coplanar Mount (Pipe x Flange) Five way shutoff valves
NY 12203 (USA), United Kingdom -UK, Malaysia, Singapore 5 Way 'T' Type (Integral Mounting)
Philippines, UK, Poland, Dammam -KSA 5 Way 'H' Type (Integral Mounting)
Europe, Singapore, Malaysia, Qatar 5 Way 'F' Type (Separate Mounting)
Thailand, Malaysia, Japan, Czechia T Type One Side Flange for Direct Mounting 5 Way isolation Valves
Bangladesh, China, Colombia, Malaysia R Type For Remote Mounting 5 Way shutoff valves
Kuwait, Philippines, Taiwan, South Africa

Coplanar Type 5 Way isolation Valves

Singapore, Malaysia, South Korea, Bahrain T5 type 6 Direct Mounting 5 Way shutoff valves
UK, Belgium, Indonesia, Philippines R5 Type 1 5 Way isolation Valves
Hong Kong, Thailand, France, Oman r5 type 2 Direct Mounting 5 Way shutoff valves
Turkey, Malaysia, Germany Manifold – R – 5 Way-01
Malaysia, Finland, USA, Dubai Manifold – R – 5 Way-02 (Direct Mounting)
Spain, Brazil, Saudi Arabia (KSA),UK Manifold – R – 5 Way-03 (Direct Mounting)
Europe, Singapore, South Africa, UAE Manifold - H - 5 Way-02