Titanium Grade 5 Compression Tube Fittings

  • Home /
  • Titanium Grade 5 Tube Fittings
Titanium Grade 5 Tube Fittings

Minimum Yield Strength Chart Of Ti Grade 5 Ferrule Fittings

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Titanium Gr. 5 4.43 g/cm3 1632 °C (2970 °F) Psi – 138000 , MPa – 950 Psi – 128000 , MPa – 880 14 %

 

Equivalent Table Of CP Grade 5 Titanium Compression Fittings

STANDARD WERKSTOFF NR. UNS
Titanium Gr. 5 3.7165 N56400

 

Chemical Structure Of Ti Cp Grade 5 Tube Fittings

Grade Ti C Fe H N O Al V
Ti Grade5 90 min – 0.25 max – – 0.2 max 6 min 4 min

 

Specification And Material Grade Of Titanium Grade 5 Tube Fittings

BRAND NAME
TU-LOK
Equivalent To
 SWAGELOK, PARKER, DK-LOK, HOKE
ASTM SPECIFICATION
 ASME SB381/381M R56400, ASTM B381/381M R56400
TUBE SIZE
1/8’’ to 2’’ and 3mm to 50mm
MATERIAL GRADES

Titanium Gr.5 – UNS R56400
ASTM STANDARD

ASTM D3294 and D1710

THREAD
UNF, BSPT, NPT, BSP, SAE, ISO etc.
AVAILABLE THREAD

NPT(ANSI B1.20.1), and ISO thread configurations (BSPT, BSPP)
DIMENSION

DIN, ASTM, BS and all International Standards
FORM

Union, Elbow, Hex Nipple, Elbow, Cap, Adapter, Tee etc.
PRESSURE RATING
300/1000/3000/6000/10000PSI for Titanium Grade 5

 

Frequently Used Ti-6AL-4V Grade 5 Compression Tube Fittings types

Straight Union Bulkhead Union Reducing Union Union Elbow Union Cross Union Tee
Male Connector Female Connector Male Bulkhead Connector Female Bulkhead Connector Male to Male Elbow Male Elbow
Female Elbow Male to Female Elbow Male Run Tee Male Branch Tee Female Branch Tee Female Run Tee
Male Adaptor Female Adaptor Tube End Reducer OD Plug Bulkhead Lock Nut OD Cap

 

Destructive, Non Destructive testing done on Ti Gr 5 Double Ferrule Compression Tube Fittings

  1. Pitting Resistance Test
  2. Flattening Test
  3. Intergranular Corrosion (IGC) Test
  4. Micro Test
  5. Macro Test
  6. Hardness Test
  7. Chemical Analysis - Spectro Analysis
  8. Positive Material Identification - PMI Testing
  9. Flaring Test
  10. Mechanical Testing Such as Tensile, Elongation, Reduction of Area

 

Usability of Titanium Alloy Grade 5 High Pressure Compression Fittings

  1. Hydro-Carbon Process Plants
  2. Chemical Process Plants
  3. Marine Industry
  4. Architecture
  5. Medical Instruments
  6. Desalination Plants
  7. Power Generation

 

 

Instrumentation Tube Fittings