Stainless Steel 316ti Hydraulic Tube Fittings

  • Home /
  • SS 316ti Hydraulic Fittings
SS 316 HYDRAULIC FITTINGS

 

BRAND  TU-LOK
DESIGN STANDARD DIN 2353/ ISO 8434-1
MATERIAL SS 316TI ( 1.4571)
SERIES  LL- LOW PRESSURE , L- MEDIUM PRESSURE,  S- HIGH PRESSURE
WORKING PRESSURE  (LOW) LL SERIES - 100 BAR
(MEDIUM)L SERIES - 100 BAR TO 500 BAR
(HEAVY)S SERIES - 200 BAR TO 800 BAR
SIZE RANGE  LL SERIES - 4LL TO 12LL
L SERIES - 6L TO 42L
S SERIES - 6S TO 38S
CONNECTIONS TUBE TO TUBE , TUBE TO MALE THREAD , TUBE TO FEMALE THREAD , TUBE TO BUTT WELD , TUBE TO SOCKET WELD , TUBE TO JIC 37* , TUBE TO 24* CONE, TUBE TO SWIVEL END , TUBE TO ADJUSTBALE STANDPIPE 
WELD NIPPLE TO MALE THREAD , WELD NIPPLE TO FEMALE THREAD , WELD NIPPLE TO BUTT WELD , WELD NIPPLE TO SOCKET WELD , WELD NIPPLE TO 24* CONE , WELD NIPPLE TO 37* JIC , WELD NIPPLE TO SWIVEL 
BODY TYPE FORGED, BAR STOCK
ACCESSORIES O-RING, DOWTY SEAL , COPPER WASHER , ED SEAL, CUTTING RING , NUT
O-RING & SEALS  NBR ( -35*C TO 100* C ) VITON (-25*C TO 200* C) , PTFE - (-60*C TO 240*)
SURFACE STAINLESS STEEL 316 TI - EXPORT BRIGHT FINISH, SHORT BLASTED FINISH, ELECTROPLATED FINISH
TEMPERATURE  STAINLESS STEEL - (-60*C TO 400*C) 
EQUIVALENT BRANDS PARKER, HY-LOK , DK-LOK , STAUFF, HYDAC , VOSS
MATERIAL DESIGNATOR STAINLESS STEEL - ASTM A 276 , ASTM 182

 

SS 316 ERMETO FITTINGS

1.4571 HYDRAULIC FITTINGS

SS 316 HYDRAULIC FITTINGS

SS 316TI HYDRAULIC TUBE FITTINGS

 

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1399 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

 

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 316TI 1.4571 S31635 SUS 316Ti 320S31 08Ch17N13M2T Z6CNDT17‐123 X6CrNiMoTi17-12-2

 

Grade C Mn Si P S Cr Mo Ni N
SS 316TI 0.08 max 2 max 0.75 max 0.045 max 0.030 max 16.00 – 18.00 2.00 – 3.00 10.00 – 14.00 68.395 min

 

  • Gas Processing
  • Power Generation
  • Pharmaceuticals
  • Off-Shore Oil Drilling Companies
  • Petrochemicals
  • Specialty Chemicals