sales@tu-lok.com +91 9372644626

ptfe equal tee

ptfe equal tee, PFA equal Tee Manufactures in India.

High Quality Teflon PFA equal Tee, PTFE Stainless Steel equal Tees Supplier in Mumbai, India

PVDF equal tee, PP equal tee, PTFE Reducing Piping Tee Exporter in Mumbai, India


ptfe equal tee
Polypropylene Equal Tee
Teflon PFA equal Tee
ptfe equal tee
Polypropylene Equal Tee
Teflon PFA equal Tee

Content

What is ptfe equal tee?

Equal Tees are a type of pipe fitting which are T-shaped having two outlets, at 90° to the connection to the main line. It is a short piece of pipe with anadjacent outlet. Pipe Tee is used to connect pipelines with a pipe at a right angle. Pipe Tees are widely used as pipe fittings.Chemical Processing of PTFE equal tee includesWater Treatment, Power Generation, Ultrapure Chemical Processing,and Use for acids, caustics, bleach etc.

Welding forEqual Tees PTFE is in accordance with ASME Boiler and meets the requirements of Pressure Vessel Code, clause nine. Apart from that, each PFA pipe and PFA fittings has at least one 2mm diameter exhaust hole in order to release the gas trapped between the liner and the metal part. Whereas when the pipe length is more than 500mm, it will have minimum two exhaust holes. However, Reducing flanges don't have exhaust hole.,

PFA Equal Tee Specification
  • Size : 25 NB to 300 NB
  • Outer body : ASTM A 395 Gr 60-40-18
  • Flange Connection : ANSI B 16.5
  • Face to Face : ANSI B 16.10
  • Spark Test : 15 KVA
  • Hydro Test : at 29.8 kg/cm2
  • FEP- Max Temp : 180° C
  • PP Max Temp : 100° C
  • PFA Max Temp : 200° C

Let’s have a look at the Product Description & Designof PTFE tee-

  1. PFA lined Pipes and PFA lined Fittings
  2. Our metal pipes and fittings for PFA lining are either manufactured via casting or through welding seamless pipes.
  3. The available dimensions are 1/2" ~ 6", the thickness of metal pipe and metal fittings for PFA lining are in accordance with schedule 40.

The default materials used are In accordance with ASTM A105 if the fitting is made via casting, then the flange will be cast as part of the fitting.Coating maycontain two layers and special requirements for coating are available upon request with Base paint and Surface paint. The Thickness can go up to 110µm.

Polypropylene Equal Tee size
NOMINAL BORE NB
CENTER LINE TO FACE (X)
FLANGE OD (ØB)
RAISED FACE DIA (R/F)
LINER THICKNESS
STEEL THICKNESS
(MM)
(INCHES)
(MM)
(MM)
(MM)
(MM)
(MM)
25
1
89
108.0
51
4.0
8.0
40
1.5
102
127.0
73
4.0
8.0
50
2
114
152.4
92
4.0
9.0
80
3
140
190.5
127
4.0
10.0
100
4
165
228.6
157
4.0
11.5
150
6
203
279.4
216
4.0
12.0
200
8
229
342.9
270
Upon Request
250
10
279
406.4
324
300
12
305
482.6
381

PTFE Lined Equal Tee can be supplied by PTFE equal tee suppliers with virgin liners or static dissipating Anti-static liners to prevent static build up within piping on site. The common sizes are available with a cast steel body, tees with rotating flanges are supplied as fabrications.Loose flanges may be provided with the tee having all three sides or opening of equal dimension.

Teflon PFA Equal Tee dimensions
 
Teflon PFA Equal Tee dimensions

NB - 1
NB - 2
C - 1
15
15
65
20
20
75
25
25
89
40
40
102
50
50
114
50
25
114
50
40
114
80
25
140
80
40
140
80
50
140
80
80
140

Dimensional Standards Of Fluorinated Ethylene Propylene Lined Equal Tee :

All dimensions are in mm otherwise specified & as per ANSI B1 6.9.

The ends are sealed with plastic plates to prevent damage to the PFA liner.For water and oil free lined PFA lined pipes and PFA fittings, the two ends are sealed with adhesive-free tapes and covered with end caps to prevent damage to the PFA liner. Before storage and shipping, the products are labeled, numbered, and sorted according to order number, charge number, and content with appropriate PTFE lined equal tee dimensions. After the order, they are collectively stored or shipped. The products can be packaged with wooden crates. The interior of the crate contains a large plastic seal to prevent water and vapor infusion.

Types Of PTFE Pipe Tee
ptfe equal tee manufacturer
PTFE Reducing Tee
PTFE Instrument Tee
PTFE Equal Tee
PTFE Reducing Tee
PTFE Instrument Tee

PTFE Pipe Tee Technical Data- Fluoropolymer Properties
Item Unit ASTM, Test Method, PTFE(4F) PFA PCTFE, (3F) PVDF, (2F) FEP, (4-6F) PEEK
ptfe equal tee Physical Properties, Density D792 2.14~2.20 2.12~2.17 2.1~2.2 1.75~2.17 2.12~2.17 1.31
Melting Point oC 327 302~310 210~212 170 253~282 340
Tensile Strength Kg/cm2 D638 280~350 320 315~420 400~520 200~320

1142

Elongation % D638 200~400 280~300 80~250 100~300 250~330 20
Compression Strength Kg/cm2 D695 120 - 320~520 600 150
Impact Strength Kg*cm/cm D256 16.3 Not Damaged 13.6~14.7 19.6~21.8 Not Damaged Not Damaged
Hardness Rockwell Hardness D782 R25 - R75~95 R100~115 R25 R126
Hardness Shore Hardness D1706 D55 D60 D90 D80 D55 D85
Static Friction Coefficient - 0.05 - 0.25 0.10 .
Kinetic Friction Coefficient - 0.10 0.2 0.37 0.39 0.3 0.4
ptfe equal tee Thermal Properties Heat Conductivity 10-4 cal/cm., sec.oC C117 5.9 6.2 4.7~5.3 3.0 6.0
Coefficient of Linear Expansion  10-5 /oC D696 9.9(23~66oC) 12(21~100oC) 4.5~7.0 8.5 8.3~10.5(-73~71oC)
Operating Temperature oC 260 260 150~180 150 200 300
ptfe equal tee Electrical Properties Volume Resistibility .cm D257 >1018 >1018 12*1018 20*1014 >1018
Surface Resistibility D257 >1016 >1016 - - >1016 >1013
Insulation Resistibility 1/8” thick, Kv/mm D149 16~24 20~24 20~24 10.4 20~24 24
ptfe equal tee Durability Chemical Resistance D543 Excellent Excellent Good Good Excellent Good
Flammability % D635 Non-Flammable Non-Flammable Non-Flammable Non-Flammable Flame Resistant
Permeability % D570 < 0.01 0.03 0.00 0.04 <0.01 0.10

Technical Specification of PTFE Lined Equal Tee includesFlanges Made of IS 2062 Plates, ASTM A105, CF8 (SS304), CF8M (SS316), Dimensions DIN PN10/16, BS 10, ASME 150 / 300, MixedExtrasEarthing Studs / Lugs, Vent Extensions, Material : Stainless Steel, Lining of PFA / HDPE / PP, and Geometry : Non Standard Dimensions.

Types of Fluoropolymers and Chemical Resistance Comparison
Category (Name)
Melting Point and Operating Temperature
Chemical Resistance
PTFE
m.p. 327oC, W.TEMP(MAX) 260oC

Excellent chemical stability;, PTFE don't interact with the vast majority of chemicals and solvents., However, it is vulnerable to molten alkali metal., PTFE also interacts with fluorine gas and fluorine compounds, such as CIF3. OF2, under high temperature and high pressure environments

ETFE
m.p. 270oC, W.TEMP(MAX) 150oC

Similar to the chemical resistance of PTFE, but easily corroded by nitric acids. Has chemical resistance on par with PTFE, but easily corroded by certain chemicals such as nitric acid.

PCTFE
m.p. 327oC, W.TEMP(MAX) 260oC

Highly crystalline, high polymer material, with superior permeability properties. 

PFA
m.p. 327oC, W.TEMP(MAX) 260oC

Similar to the chemical resistance of PTFE, with superior mechanical and sanitary properties.

FEP
m.p. 327oC, W.TEMP(MAX) 260oC
Similar to the chemical resistance of PTFE, but has slightly lower operating temperature.
PVDF
m.p. 327oC, W.TEMP(MAX) 170oC

Easily dissolved by fuming sulfuric acid, high temperature sulfuric acid, or caustic soda above 100oC; also bloats or dissolves when interacting with strong solvents such as aceton、ketone、DMA, or extremely alkalic primary amine such as n-butylamine.

    PVDF Tee Applications
  • Polypropylene Equal Tee uses in Petrochemical Refining Industry
  • PTFE Stainless Steel equal Tees uses in Paper & Pulp Industry
  • Teflon PFA equal Tee uses in Chemical Industry
  • PTFE Pipe Tee uses in Power Generation Plants
  • Reducing PTFE Tee uses in Oil & Gas Industry
  • ptfe lined equal tee uses in Pharma Industry

Procedures of Oil and Water-Free treatmentinvolves AK3 oil removal (Heated), Acid neutralization, cleansing using RO Water and Dry nitrogen air spraying.Testing can be performed in a full inspection policy that requires all finished PFA pipe and PFA fitting to pass the following test before shipment. It is possible to perform other methods of testing upon customer demand.

Dealer of Comprehensive Range PTFE/PFA/PVDF/PP equal Tee, MS Equal Tee Price, MS PTFE/PFA Reducing Tee Stockholder in Mumbai

PFA Pipe Tee Diagram
PFA Pipe Tee Diagram

 

ptfe equal tee Price
  • SS316 PP or PTFE Lined Equal Cross Tee , US $50.00-$300.00 / Kilogram
  • High Quality 3 Way Double Ferrule Equal Tee Union Tube Fitting, US $7.20-$8.20/ Piece
  • Chemical Resistant PTFE Lining Tee, US $1.00-$222.00 / Piece
  • ptfe connector tee connector ptfe pipe fittings custom make, US $0.10-$9.90 / Piece
  • Stainless Steel Flanged Tee Sight Glass, US $100.00-$150.00 / Piece
  • FEP PTFE Lined Equal Cross Tee, US $50.00-$300.00 / Kilogram
  • 304/316 stainless steel welding reducer equal tees, US $1.00-$50.00 / Piece

Appearance of each piece is checked by PTFE equal tee manufacturers for bubbles, pinholes, or other impairing defects before the lining process. Minor blemishes are processed during the coating stage.The exhaust holes are sealed before packaging. Pressure Test Applies max operating pressure*1.5 Air, Tight Test Applies mzx operating pressure*1.5, Spark Test: 15000~20000VDC, Water and Oil Free Test, Cleansed according to the standard of 1.0mg/ft (MAX), samplesto be approved by clients.Coating: We pick products on random for testing with paint thickness tester.

check latest PTFE Fittings Tee, PVDF equal Pipe Tee Price list
Interchangeable With Parts From The Following Manufacturers:
SWAGELOK
PARKER ANCHOR FLUID POWER HAMLET LETLOK
SWAGELOK
PARKER
ANCHOR FLUID POWER
HAMLET LETLOK
MHA ZENTGRAF
STAUFF
HYLOK
SMS MEER
MHA ZENTGRAF
STAUFF
HYLOK
SMS MEER

PVDF equal Tee, PFA and PP Instrument Tee Distribution, PTFE Lined Reducing Piping Tee, PTFE Lined Equal Tee, Polypropylene (PP) Reducing Lined Tee Manufactures in India.