Nickel 200 Compression Tube Fittings

  • Home /
  • Nickel 200 Tube Fittings
Nickel 200 Tube Fittings
  1. Heat exchangers
  2. Food processing
  3. Chemcal Plants
  4. Dye production
  5. Pickling equipments
  6. Petrochemical plants
  7. Mixing Tanks

 

GRADE
Nickel 200 UNS N02200
Equivalent To
SWAGELOK, PARKER, DK-LOK, HOKE
Material
Nickel Alloy
Range
1/8’’ to 2’’ and 3mm to 50mm
Form
Union, Elbow, Hex Nipple, Elbow, Cap, Adapter, Tee etc
Delivery Condition
Machined
Inspection, Test Reports  
Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports

 

Grade C Mn Si S Cu Fe Ni Cr
200 0.15 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

 

STANDARD WNR Material Number UNS JIS BS GOST AFNOR EN
200 2.4066 N02200 NW 2200 NA 11 НП-2 N-100M Ni 99.2

 

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
200 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %


  1. Tube to Tube – Tee, Bulk Head, Straight, Elbow, Cross
  2. Tube to Male – Male Tee, Male Elbow, Male Stud
  3. Female Connector – Female Elbow, Tee, Straight
  4. Positionable Elbow & Tee (Swivel)
  5. Tube Closure – Cap, Plug
  6. Ferrule Set, Weld Connector & Nut

 

TU-LOK NPT Threads Dimensions
NPT THREAD
DASH
MALE THREAD
FEMALE
SIZE & PITCH
SIZE
MINOR OD
THREAD ID
inch – TPI
mm
inch
mm
inch
1/8 – 27
-2
9,9
0.39
8,4
0.33
1/4 – 18
-4
13,2
0.52
11,2
0.44
3/8 – 18
-06
16,6
0.65
14,7
0.58
1/2 – 14
-8
20,6
0.81
17,8
0.7
3/4 – 14
-12
26,0
1.02
23,4
0.92
1 – 11.1/2
-16
32,5
1.28
29,5
1.16
1.1/4 – 11.1/2
-20
41,2
1.62
38,1
1.5
1.1/2 – 11.1/2
-24
47,3
1.86
43,9
1.73
2 – 11.1/2
-32
59,3
2.33
56,4
2.22
2.1/2 – 8
-40
71,5
2.82
69,1
2.72
3 – 8
-48
87,3
3.44
84,8
3.34

TU-LOK BSPT & BSPP Threads Dimensions
BSPT & BSPP
DASH
BSPT MALE
BSPP MALE
BSPT FEMALE
BSPP FEMALE
SIZE & PITCH
SIZE
THREAD OD
THREAD OD
THREAD ID
THREAD ID
inch – TPI
mm
inch
mm
inch
mm
inch
mm
inch
1/8 – 28
-2
9,5
0.37
9,6
0.38
8,4
0.33
8,6
0.34
1/4 – 19
-4
12,8
0.5
13,0
0.51
11,2
0.44
11,9
0.47
3/8 – 19
-6
16,3
0.64
16,5
0.65
14,7
0.59
15,2
0.6
1/2 – 14
-8
20,4
0.8
20,8
0.82
18,3
0.72
19,1
0.75
5/8 – 14
-10
22,5
0.89
22,8
0.9
20,6
0.81
20,8
0.82
3/4 – 14
-12
25,9
1.02
26,3
1.04
23,9
0.94
24,6
0.97
1 – 11
-16
32,6
1.28
33,1
1.3
29,7
1.17
30,7
1.21
1.1/4 – 11
-20
41,1
1.62
41,8
1.64
38,6
1.52
39,4
1.55
1.1/2 – 11
-24
47,0
1.85
47,7
1.88
44,5
1.75
45,5
1.79
2(11)
-32
58,6
2.31
59,5
2.34
56,4
2.22
57,4
2.26
2.1/2 – 11
-40
74,1
2.92
75,1
2.95
71,9
2.83
72,6
2.86
3 – 11
-48
86,6
3.41
87,9
3.46
84,6
3.33
85,4
3.36

 


Straight Union Bulkhead Union Reducing Union Union Elbow Union Cross Union Tee
Male Connector Female Connector Male Bulkhead Connector Female Bulkhead Connector Male to Male Elbow Male Elbow
Female Elbow Male to Female Elbow Male Run Tee Male Branch Tee Female Branch Tee Female Run Tee
Male Adaptor Female Adaptor Tube End Reducer OD Plug Bulkhead Lock Nut OD Cap