Inconel Hydraulic Tube Fittings Manufacturer

  • Home /
  • Inconel Hydraulic Fittings
INCONEL HYDRAULIC FITTINGS

 

BRAND  TU-LOK
DESIGN STANDARD DIN 2353/ ISO 8434-1
MATERIAL  INCONEL 625, INCONEL 718, INCONEL 825, INCOLOY 800
SERIES  LL- LOW PRESSURE , L- MEDIUM PRESSURE,  S- HIGH PRESSURE
WORKING PRESSURE  (LOW) LL SERIES - 100 BAR
(MEDIUM)L SERIES - 100 BAR TO 500 BAR
(HEAVY)S SERIES - 200 BAR TO 800 BAR
SIZE RANGE  6 MM TO 42 MM
CONNECTIONS TUBE TO TUBE , TUBE TO MALE THREAD , TUBE TO FEMALE THREAD , TUBE TO BUTT WELD , TUBE TO SOCKET WELD , TUBE TO JIC 37* , TUBE TO 24* CONE, TUBE TO SWIVEL END , TUBE TO ADJUSTBALE STANDPIPE 
WELD NIPPLE TO MALE THREAD , WELD NIPPLE TO FEMALE THREAD , WELD NIPPLE TO BUTT WELD , WELD NIPPLE TO SOCKET WELD , WELD NIPPLE TO 24* CONE , WELD NIPPLE TO 37* JIC , WELD NIPPLE TO SWIVEL 
BODY TYPE FORGED, BAR STOCK
SURFACE EXPORT BRIGHT FINISH, SHORT BLASTED FINISH, ELECTROPLATED FINISH
EQUIVALENT BRANDS PARKER, HY-LOK , DK-LOK , STAUFF, HYDAC , VOSS

 

INCONEL 625 HYDRAULIC FITTINGS

INCONEL 625 HYDRAULIC FITTINGS

INCONEL 718 HYDRAULIC FITTINGS

INCONEL 718 HYDRAULIC FITTINGS

INCONEL 800 HYDARULIC FITTINGS

INCONEL 800 HYDARULIC FITTINGS

INCONEL 825 HYDRAULIC FITTINGS

INCONEL 825 HYDRAULIC FITTINGS

 

OD
OD Actual
Thread Designation - Nominal Size
Thread per inch
(fraction inch)
(inches)
(inches)
 NPT
BSP
5/16
0.3125
1/16
27
28
13/32
0.405
1/8
27
28
35/64
0.540
1/4
18
19
43/64
0.675
3/8
18
19
27/32
0.840
1/2
14
14
1-3/64
1.050
3/4
14
14
1-5/16
1.315
1
11-1/2
11
1-21/32
1.660
1-1/4
11-1/2
11
1-29/32
1.900
1-1/2
11-1/2
11
2-3/8
2.375
2
8
11
2-7/8
2.875
2-1/2
8
11
3-1/2
3.5
3
8
11
4
4.0
3-1/2
8
11
4-1/2
4.5
4
8
11
5-5/8
5.563
5
8
11
6-5/8
6.718
6
8
11

 

NPT/ISO PIPE SIZE IN. INCONEL
MALE FEMALE
PSIG (BAR) PSIG (BAR)
1/16 15 000 (1 033) 12 900 (888)
1/8 15 000 (1 033) 12 500 (861)
1/4 15 000 (1 033) 12 700 (875)
3/8 15 000 (1 033) 10 200 (702)
1/2 14 800 (1 019) 9 400 (647)
3/4 10 000 (689) 8 900 (613)
1 10 000 (689) 8 500 (585)
1 1/4 10 000 (689) 9 600 (661)
1 1/2 9 600 (661) 8 900 (613)
2 7 500 (516) 7 500 (516)

 

Inconel Element (% By Mass)
Ni Cr Fe Mo Nb Co Mn Cu Al Ti Si C S P B
600 72.0 14.0–17.0 6.0–10.0 1.0 0.5 0.5 0.15 0.015
617 44.2–56.0 20.0–24.0 3.0 8.0–10.0 10.0–15.0 0.5 0.5 0.8–1.5 0.6 0.5 0.15 0.015 0.015 0.006
625 58.0 20.0–23.0 5.0 8.0–10.0 3.15–4.15 1.0 0.5 0.4 0.4 0.5 0.1 0.015 0.015
690 59.5 30 9.2 0.35 0.01 0.02 0.35 0.019 0.003
718 50.0–55.0 17.0–21.0 Balance 2.8–3.3 4.75–5.5 1.0 0.35 0.2–0.8 0.65–1.15 0.3 0.35 0.08 0.015 0.015 0.006
X-750 70.0 14.0–17.0 5.0–9.0 0.7–1.2 1.0 1.0 0.5 0.4–1.0 2.25–2.75 0.5 0.08 0.01

 

Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
Psi – 1,35,000 , MPa -930 Psi – 75,000 , MPa – 517 42.5

 

Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
Inconel 600 Pipe N06600 NA 13 NiCr15Fe 2.4816 NC15FE11M МНЖМц 28-2,5-1,5 NCF 600
Inconel 625 N06625 NA 21 NiCr22Mo9Nb 2.4856 NC22DNB4M ХН75МБТЮ NCF 625
Inconel 601 N06601 NA 49 NiCr23Fe 2.4851 NC23FeA XH60BT NCF 601
Incoloy 825 N08825 NA 16 NiCr21Mo 2.4858 NFE30C20DUM ЭП703 NCF 825

 

  • Petrochemical Industries
  • Gas Processing Industries
  • Oil & Gas Industries
  • Food Processing Industries
  • Fertilizers Industries
  • Power Generation Industries
  • Sugar Industries
  • Chemical Industries

 

  • Outstanding resistance to pitting, crevice corrosion and intercrystalline corrosion
  • Almost completely free from chloride induced stress corrosion cracking
  • High resistance to oxidation at elevated temperatures
  • Good resistance to acids, such as sulfuric, phosphoric, nitric, and hydrochloric
  • Excellent mechanical properties at both extremely low and extremely high temperatures

 

  • Size range from 1/16” to 2” (2mm to 38mm O.D.tubing)
  • Variety of end connections and patterns as per Customer Request
  • Inconel Tube Fittings do not twist the tube during installation.
  • Positive leak free seal assembly and reassembly
  • Make and remake of the fittings is very much eased, as nuts are silver plated internally to prevent galling of threads.
  • Low torque Operation