Copper Hydraulic Hose Fitting

  • Home /
  • Copper Hydraulic Fittings
COPPER HYDRAULIC FITTINGS

 

Specification And Material Grade Of Copper Hydraulic Fittings

BRAND  TU-LOK
DESIGN STANDARD DIN 2353/ ISO 8434-1
MATERIAL COPPER 
SERIES  LL- LOW PRESSURE , L- MEDIUM PRESSURE,  S- HIGH PRESSURE
WORKING PRESSURE  (LOW) LL SERIES - 100 BAR
(MEDIUM)L SERIES - 100 BAR TO 500 BAR
(HEAVY)S SERIES - 200 BAR TO 800 BAR
SIZE RANGE  LL SERIES - 4LL TO 12LL
L SERIES - 6L TO 42L
S SERIES - 6S TO 38S
CONNECTIONS TUBE TO TUBE , TUBE TO MALE THREAD , TUBE TO FEMALE THREAD , TUBE TO BUTT WELD , TUBE TO SOCKET WELD , TUBE TO JIC 37* , TUBE TO 24* CONE, TUBE TO SWIVEL END , TUBE TO ADJUSTBALE STANDPIPE 
WELD NIPPLE TO MALE THREAD , WELD NIPPLE TO FEMALE THREAD , WELD NIPPLE TO BUTT WELD , WELD NIPPLE TO SOCKET WELD , WELD NIPPLE TO 24* CONE , WELD NIPPLE TO 37* JIC , WELD NIPPLE TO SWIVEL 
BODY TYPE FORGED, BAR STOCK
SURFACE NATURAL FINISH
 
TEMPERATURE  COPPER - (-60*C TO 175*C)
EQUIVALENT BRANDS PARKER, HY-LOK , DK-LOK , STAUFF, HYDAC , VOSS

 

UNS C12200 Hydraulic Tube Fittings Material Equivalent Properties

STANDARD WERKSTOFF NR. UNS
Copper 1786 C12200

 

Chemical Composition of Copper Ermeto Tube Fittings

Chemical Requirements:
Copper Pipe (Incl. Silver) 99.85% Min.
Phosphorus 0.013 to 0.5%
Total Impurities 0.06% Max.

 

Mechanical Property of Copper Hydraulic Hose Fitting

Density 8.89 g/cm3
Melting Point 1370 °C (2500 °F)
Tensile Strength Psi – 1,15,000 , MPa – 790
Yield Strength (0.2%Offset) Psi – 52,000 , MPa – 355
Elongation 40 %

 

Physical Property of Copper Reusable Fittings

Condition Tensile strength N/mm2 % Elongation on 5.65 A Min.
Annealed 200-250 40
Half Hard 250 Min 30
As Manufactured 280 Min

 

Copper Single Ferrule Fittings Test Certificates

  • EN 10204/3.1B,
  • Third Party Inspection Report, etc
  • 100% Radiography Test Report
  • Raw Materials Certificate

 

 

 

Hydraulic Fittings