Aluminum Air Pipe is a new concept that uses push in fittings. 2 Inch Aluminum Pipe is said to be environmentally friendly and offers high conductivity. 4 Inch Aluminum Pipe can be used up to a pressure of 17 bars. 3 Inch Aluminum Pipe has good durability due to the fittings also being made up of the same element. 4 Aluminum Pipe offers leakage free transfer for several years. Mobility of 3 Aluminum Pipe is increased as the simple system design makes it easy to reopen and reassemble the fittings. 2 Aluminum Pipe is defined by the internal diameter or bore and is used for transporting fluid and other media.
Aluminum Tube Suppliers suggest these pipes due to their low cost and ability to resist solvents. Galvanized Aluminum Pipe is desired more when compared to steel piping. This is because Aluminium Compressed Air Pipe provides conveyance inflammable solvents since it cannot create sparks or fire even after being manipulated. Aluminum Compressed Air Piping is said to be non-magnetic and does not ignite easily. Astm B241 pipings are said to be easy to install and save half of the installation time. Threaded Aluminum pipes provide ease of modification and can replace pipes without shutting down the current plant. Aluminum Square Pipe is light in weight but it does not mean it cannot handle the load. 22mm Aluminium tubes are strong due to the element being strong and can bear load even with thin walls.
Aluminum Oval Tube has a low density and low maintenance cost. The o ring in 2in Aluminum Tube ensures an air-tight fitting for high work efficiency. Aluminum Tubing Menards is ideal for fence repair, handles, key stocks, and safety grids. 6061 Aluminum Tube offers a leakage proof application and does not waste energy. 6 Inch Aluminum Pipes are also resistant to vibration and corrosion. Aluminum Square Pipe is easy to clean and can be reused. Aluminum Air Line provides the best solution in high working temperature and working pressure range. 5 Inch Aluminum Pipe offers high pipe tolerance.
Anodized Aluminum Pipe offers color stability. The exterior anodic coating on the Anodized Aluminum Tube provides stability against ultraviolet rays. Lowes Aluminum Tubing with an anodized finish is said to be the second hardest substance known to humankind. 7075 Aluminum Tube manufactured by us are supplied to various countries and are manufactured using international standards. Extruded Aluminum Tube produced by us is used for infrastructure, shipbuilding, architecture, and car parts.
Specifications | Astm B241 / ASME SB241 |
---|---|
Pipe Thickness | 0.3mm - 50 mm |
Pipe Standard | EN, ASTM, ASME AISI, GB, JIS, DIN Aluminum Pipe Supplier |
Aluminum Seamless Pipe Outer Diameter | Sizes up to 12” NB/ 6.00 - 250 mm OD |
Aluminum Welded Pipe size | 5.0 to 1219.2 mm |
Aluminum Welded Tube Size | 6.35 - 152 mm OD |
Aluminum EFW Pipe size | 5.0 - 1219.2 mm |
Aluminum tubing wall thickness | 0.0020" to 0.0220" (custom wall thicknesses available) |
Aluminum Seamless Tube Size | 15 NB - 150 NB IN/ 3.35 To 101.6 mm OD, |
Aluminum Pipe & Tube Finish | AP (Annealed & Pickled), Polished, MF, BA (Bright & Annealed), NO.4, NO.1, BA, 2B, 8K, HL, Mirror finish,etc |
Pipe & Tube Swg & Bwg | 12 Swg., 10 Swg., 16 Swg., 14 Swg., 20 Swg, 18 Swg. |
Aluminum Pipe Schedule | SCH10, SCH 5, SCH 80, SCH 40, , SCH 160, SCH 80S, SCH XS, SCH XXS |
Aluminum Pipe & Tube Form | Hydraulic, Round, Rectangular, Hollow, Pan Cake Coils, Square, Coiled, “U” Shape, Straight Pipes etc. |
Aluminum Pipe & Tube Length | Standard & Cut length, Single and Double Random, |
Aluminum Pipe & Tube Type | Aluminum ERW/ Seamless / Welded / EFW / CDW /Fabricated / CEW/ DOM Pipe |
Pipe Value Added Service | as per required Size & Length Draw & Expansion , Pickled Bending and Polish (Electro & Commercial) Annealed, Machining Etc. |
Aluminum Tube Application | Oil Tube, Boiler and Heatexchanger, Gas Tube, Fluid Tube |
Aluminum Pipe & Tube End | Beveled End, Plain End, Treaded Pipe. |
Pipe Marking | marked as follows All Aluminum Pipes : Standard, Grade, Thickness, OD, Heat No. (Or according to the customer’s request.), Length |
Material Test Certificates (MTC) |
|
Manufacturer |
|
Specialized in |
|
Description | Price |
Two Row Aluminium Alloy Micro-Multiport Tube for Heat Exchanger Aluminum Tube | US $ 2200.0-3000.0 / Ton |
Different Sizes 6061 6063 Aluminum Tube in Stock | US $ 2550.0-3000.0 / Ton |
6061, 6201, 5083, 7050, 5052, 6106, 6082, 7075 6011, 6063 Precise Extruded Aluminum Alloy Tube | US $ 2800.0-3500.0 / Ton |
Extruded Aluminum Tube for Refrigerator and Freezer | US $ 2000.0-3000.0 / Ton |
Mill Finished Aluminum Tube 7075 5052, 5083, 2A12, 6061, 6063, 1100, 2024, 6082, 6351 | US $ 2300.0-2800.0 / Ton |
Powder Coated Paint 5A02 Aluminum Extrusion Tube /Tubing /Pipe Anodized | US $ 4 / Piece |
NPS |
Outside Diameter |
Wall Thickness |
Weight |
Weight |
|||
inch |
milimeter |
inch |
milimeter |
Schedule |
kg/Mtr |
Lb/ft |
|
1/2″ |
0.0840 |
21 |
0.0109 |
2.0769 |
40 STD |
1.0268 |
0.0851 |
0.0147 |
3.0734 |
80 STD |
1.0621 |
1.0088 |
|||
3/4″ |
1.0050 |
27 |
0.0113 |
2.0870 |
40 STD |
1.0684 |
1.0131 |
0.0154 |
3.0912 |
80 STD |
2.0195 |
1.0474 |
|||
1″ |
1.0315 |
33 |
0.0133 |
3.0378 |
40 STD |
2.0501 |
1.0679 |
0.0179 |
4.0547 |
80 STD |
3.0325 |
2.0172 |
|||
1 1/4″ |
1.0660 |
42 |
0.0140 |
3.0556 |
40 STD |
3.0385 |
2.0273 |
0.0191 |
4.0851 |
80 STD |
4.0464 |
2.0997 |
|||
1 1/2″ |
1.0900 |
48 |
0.0145 |
3.0683 |
40 STD |
4.0048 |
2.0718 |
0.0200 |
5.0080 |
80 STD |
5.0409 |
3.0361 |
|||
2″ |
2.0375 |
60 |
0.0154 |
3.0912 |
40 STD |
5.0441 |
3.0653 |
0.0218 |
5.0537 |
80 STD |
7.0480 |
5.0022 |
|||
2 1/2″ |
2.0875 |
73 |
0.0203 |
5.0516 |
40 STD |
8.0629 |
5.0793 |
0.0276 |
7.0010 |
80 STD |
11.0411 |
7.0661 |
|||
3″ |
3.0500 |
89 |
0.0216 |
5.0486 |
40 STD |
11.0284 |
7.0576 |
0.0300 |
7.0620 |
80 STD |
15.0272 |
10.0253 |
|||
4″ |
4.0500 |
114 |
0.0237 |
6.0020 |
16.0073 |
10.0790 |
|
0.0337 |
8.0560 |
22.0318 |
14.0983 |
||||
6″ |
6.0625 |
168 |
0.0188 |
4.0775 |
19.0252 |
12.0924 |
|
0.0203 |
5.0516 |
20.0739 |
13.0923 |
||||
0.0219 |
5.0563 |
22.0318 |
14.0983 |
||||
0.0250 |
6.0350 |
25.0354 |
17.0021 |
||||
0.0280 |
7.0112 |
40 STD |
58.0263 |
18.0974 |
|||
0.0312 |
7.0925 |
31.0334 |
21.0036 |
||||
0.0375 |
9.0525 |
37.0285 |
25.0031 |
||||
0.0432 |
10.0973 |
80 XHY |
42.0561 |
28.0573 |
|||
0.0500 |
12.0700 |
48.0719 |
32.0708 |
||||
8″ |
8.0625 |
219 |
0.0188 |
4.0775 |
25.0233 |
16.0940 |
|
0.0203 |
5.0156 |
27.0198 |
18.0259 |
||||
0.0219 |
5.0563 |
29.0286 |
19.0661 |
||||
0.0250 |
6.0350 |
20 |
33.0308 |
22.0361 |
|||
0.0277 |
7.0036 |
30 |
36.0786 |
24.0696 |
|||
0.0322 |
8.0179 |
40 |
42.0352 |
28.0554 |
|||
0.0375 |
9.0525 |
49.0216 |
33.0041 |
||||
0.0406 |
10.0312 |
60 |
53.0085 |
35.0638 |
|||
0.0500 |
12.0700 |
80 XHY |
64.0627 |
43.0388 |
|||
10″ |
10.0750 |
273 |
0.0188 |
4.0775 |
31.0588 |
21.0207 |
|
0.0219 |
5.0563 |
36.0689 |
24.0631 |
||||
0.0250 |
6.0350 |
20 |
41.0759 |
28.0035 |
|||
0.0307 |
7.0798 |
30 |
51.0002 |
34.0240 |
|||
0.0344 |
8.0738 |
56.0946 |
38.0231 |
||||
0.0365 |
9.0271 |
40 STD |
63.0301 |
40.0483 |
|||
0.0438 |
11.0125 |
71.0852 |
48.0238 |
||||
0.0500 |
12.0700 |
60 XHY |
81.0530 |
54.0735 |
|||
0.0594 |
15.0088 |
80 |
95.0969 |
64.0429 |
|||
12″ |
12.0750 |
324 |
0.0188 |
4.0775 |
37.0570 |
25.0222 |
|
0.0219 |
5.0563 |
43.0657 |
29.0309 |
||||
0.0250 |
6.0350 |
49.0713 |
33.0375 |
||||
0.0281 |
7.0137 |
55.0739 |
37.0420 |
||||
0.0312 |
7.0925 |
61.0735 |
41.0445 |
||||
0.0375 |
9.0525 |
73.0824 |
49.0562 |
||||
0.0406 |
10.0312 |
79.0727 |
53.0525 |
||||
0.0500 |
12.0700 |
97.0438 |
65.0415 |
||||
0.0562 |
14.0275 |
108.0966 |
73.0154 |
||||
14″ |
14.0000 |
356 |
0.0188 |
4.0775 |
41.0308 |
27.0732 |
|
0.0219 |
5.0563 |
48.0012 |
32.0233 |
||||
0.0250 |
6.0350 |
20 |
54.0685 |
36.0713 |
|||
0.0281 |
7.0137 |
61.0327 |
41.0172 |
||||
0.0312 |
7.0925 |
67.0939 |
45.0611 |
||||
0.0375 |
9.0525 |
STD |
81.0281 |
54.0568 |
|||
0.0438 |
11.0125 |
40 |
94.0498 |
63.0441 |
|||
0.0500 |
12.0700 |
XHY |
107.0381 |
72.0090 |
|||
0.0625 | 15.0875 |
132.0983 |
89.0278 |
||||
16” |
16.0000 |
406 |
0.0188 |
4.0775 |
47.0290 |
21.0748 |
|
0.0219 |
5.0563 |
54.0980 |
36.0910 |
||||
0.0250 |
6.0350 |
10 |
62.0639 |
42.0053 |
|||
0.0281 |
7.0137 |
70.0268 |
47.0174 |
||||
0.0312 |
7.0925 |
20 |
77.0866 |
52.0275 |
|||
0.0344 |
8.0738 |
85.0677 |
57.0519 |
||||
0.0375 |
9.0525 |
30 STD |
93.0213 |
62.0578 |
|||
0.0438 |
11.0125 |
108.0433 |
72.0797 |
||||
0.0500 |
12.0700 |
40 XHY |
123.0289 |
82.0770 |
|||
18″ |
18.0000 |
457 |
0.0219 |
5.0563 |
61.0948 |
41.0588 |
|
0.0250 |
6.0350 |
70.0593 |
47.0393 |
||||
0.0281 |
7.0137 |
79.0208 |
53.0176 |
||||
0.0312 |
7.0925 |
20 |
87.0792 |
58.0939 |
|||
0.0375 |
9.0525 |
STD |
105.0144 |
70.0588 |
|||
0.0438 |
11.0125 |
30 |
122.0369 |
82.0152 |
|||
0.0500 |
12.0700 |
XHY |
139.0198 |
93.0450 |
|||
0.0562 |
14.0275 |
40 |
155.0904 |
104.0666 |
|||
0.0625 |
15.0875 |
172.0754 |
115.0978 |
||||
20″ |
20.0000 |
508 |
0.0250 |
6.0350 |
78.0547 |
52.0733 |
|
0.0282 |
7.0163 |
88.0458 |
59.0386 |
||||
0.0312 |
7.0925 |
97.0719 |
65.0604 |
||||
0.0375 |
9.0525 |
20 STD |
117.0075 |
78.0598 |
|||
0.0438 |
11.0125 |
136.0305 |
91.0508 |
||||
0.0500 |
12.0700 |
30 XHY |
155.0106 |
104.0130 |
|||
0.0594 |
15.0088 |
40 |
183.0378 |
123.0110 |
|||
0.0625 |
15.0875 |
192.0640 |
129.0328 |
||||
0.0688 |
17.0475 |
211.0368 |
141.0901 |
||||
24″ |
24.0000 |
610 |
0.0250 |
6.0350 |
94.0456 |
63.0413 |
|
0.0281 |
7.0137 |
106.0029 |
71.0183 |
||||
0.0312 |
7.0925 |
117.0573 |
18.0932 |
||||
0.0375 |
9.0525 |
20 STD |
140.0938 |
64.0618 |
|||
0.0438 |
11.0125 |
164.0176 |
110.0219 |
||||
0.0500 |
12.0700 |
XHY |
186.0923 |
125.0490 |
|||
0.0625 |
15.0875 |
232.0410 |
156.0028 |
||||
0.0688 |
17.0475 |
40 |
255.0148 |
171.0293 |
|||
0.0750 |
19.0050 |
277.0401 |
186.0233 |
||||
30″ |
30.0000 |
762 |
0.0250 |
6.0350 |
118.0318 |
79.0433 |
|
0.0281 |
7.0137 |
132.0851 |
89.0189 |
||||
0.0312 |
7.0925 |
10 |
147.0353 |
98.0925 |
|||
0.0375 |
9.0525 |
STD |
176.0731 |
118.0648 |
|||
0.0438 |
11.0125 |
205.0983 |
138.0286 |
||||
0.0500 |
12.0700 |
20 XHY |
234.0647 |
157.0530 |
|||
0.0625 |
15.0875 |
30 |
292.0066 |
196.0078 |
|||
0.0688 |
17.0475 |
320.0817 |
215.0380 |
||||
0.0750 |
19.0050 |
348.0988 |
234.0293 |
||||
36″ |
36.0000 |
914 |
0.0250 |
6.0350 |
142.0180 |
95.0453 |
|
0.0281 |
7.0137 |
159.0672 |
107.0196 |
||||
0.0312 |
7.0925 |
10 |
177.0133 |
118.0918 |
|||
0.0375 |
9.0525 |
STD |
215.0525 |
142.0678 |
|||
0.0438 |
11.0125 |
247.0790 |
166.0353 |
||||
0.0500 |
12.0700 |
20 XHY |
282.0372 |
198.0570 |
|||
0.0625 |
15.0875 |
351.0723 |
236.0128 |
||||
0.0688 |
17.0475 |
386.0487 |
259.0467 |
||||
0.0750 |
19.0050 |
420.0576 |
282.0353 |
||||
42″ |
42.0000 |
1067 |
0.0312 |
7.0925 |
206.0914 |
138.0911 |
|
0.0375 |
9.0525 |
STD |
248.0319 |
166.0708 |
|||
0.0500 |
12.0700 |
XHY |
33.0097 |
221.0610 |
|||
0.0750 |
19.0050 |
492.0163 |
330.0413 |
||||
48″ |
48.0000 |
1219 |
0.0375 |
9.0525 |
STD |
284.0112 |
190.0738 |
0.0438 |
11.0125 |
331.0404 |
222.0487 |
||||
0.0500 |
12.0700 |
XHY |
377.0822 |
253.0650 |
|||
0.0750 |
19.0050 |
563.0750 |
378.0473 |
||||
0.0875 |
22.0225 |
655.0969 |
440.0383 |
||||
1/4" IPS(.0540"OD) |
4" IPS(4.0500"OD) |
---|---|
SCH 40, 10, 80 |
SCH 40, 10, 80, XXH, 160 |
1/8" IPS(.0405"OD) |
3 1/2" IPS( 4.0000"OD) |
SCH 40, 80 |
SCH 40, 10, 80, XXH, 160 |
1/2" IPS(.0840"OD) |
6" IPS(6.0625"OD) |
SCH 5, 40, 10, 80, XXH, 160 |
SCH 5, 40, 10, 80, 120, XXH, 160 |
3/8" IPS(.0675"OD) |
5" IPS( 5.0563"OD) |
SCH 40, 10, 80 |
SCH 40, 10, 80, XXH, 160 |
1" IPS:(1.0315′OD) |
10" IPS(10.0750"OD) |
SCH 5, 40, 10, 80, XXH, 160 |
SCH 10, 20, 40, 80 (.0500), TRUE 80(.0500) |
2 1/2" IPS(2.0875"OD) |
18" IPS (18.0000"OD) |
SCH 40, 10, 80, XXH, 160 |
SCH-40 (.0375) |
3/4" IPS(1.0050"OD) |
8 ” IPS(8.0625"OD) |
SCH 40, 10, 80, XXH, 160 |
SCH 5, 40, 10, 80, 120, XXH, 160 |
1-1/4" IPS(1.0660"OD) |
12" IPS(12.0750"OD) |
SCH 40, 10, 80, XXH, 160 |
SCH 10, 20, 40(.0375), TRUE40(.0406), SCH80(.0500) |
2" IPS(2.0375"OD) |
16" IPS(16.0000"OD) |
SCH 40, 10, 80, XXH, 160 |
SCH10(.0188), SCH40(.0375) |
1-1/2" IPS(1.0900"OD) |
14" IPS(14.0000"OD) |
SCH 40, 10, 80, XXH, 160 |
SCH10 (.0188), SCH40 (.0375) |
3" IPS( 3.0500"OD) |
|
SCH 5, 40, 10, 80, XXH, 160 |
Alloy |
Si |
Fe |
Mn |
Zn |
Cu |
Cr |
Mg |
Ti |
OTHERS TOTAL |
OTHERS EACH |
Al MIN. |
---|---|---|---|---|---|---|---|---|---|---|---|
1070 |
0.020 |
0.025 |
0.003 |
0.004 |
0.004 |
— |
0.003 |
0.003 |
— |
0.003 |
99.070 |
1060 |
0.025 |
0.035 |
0.003 |
0.005 |
0.005 |
— |
0.003 |
0.003 |
— |
0.003 |
99.060 |
1050 |
0.025 |
0.040 |
0.005 |
0.005 |
0.005 |
— |
0.005 |
0.003 |
— |
0.003 |
99.050 |
1350 |
0.010 |
0.040 |
0.001 |
0.005 |
0.005 |
0.001 |
— |
— |
0.010 |
0.003 |
99.050 |
1145 |
0.055 Si + Fe |
0.005 |
0.005 |
0.005 |
— |
0.005 |
0.003 |
— |
0.003 |
99.045 |
|
1100 |
0.095 Si + Fe |
0.005 |
0.010 |
0.005 to 0.020 |
— |
— |
— |
0.015 |
0.005 |
99.000 |
|
2024 |
0.050 |
0.050 |
0.030 to 0.09 |
0.025 |
3.08 to 4.09 |
0.010 |
1.02 to 1.08 |
0.015 |
0.015 |
0.005 |
Rem.0 |
3003 |
0.06 |
0.07 |
1.00 to 1.05 |
0.010 |
0.005 to 0.020 |
— |
— |
— |
0.015 |
0.005 |
Rem.0 |
3004 |
0.030 |
0.07 |
1.00 to 1.05 |
0.025 |
0.025 |
— |
0.08 to 1.03 |
— |
0.015 |
0.005 |
Rem.0 |
3005 |
0.06 |
0.07 |
1.00 to 1.05 |
0.025 |
0.030 |
0.010 |
0.020 to 0.06 |
0.010 |
0.015 |
0.005 |
Rem.0 |
3104 |
0.06 |
0.08 |
0.08 to 1.04 |
0.025 |
0.005 to 0.025 |
— |
0.08 to 1.03 |
0.010 |
0.015 |
0.005 |
Rem.0 |
4004 |
9.00 to 10.05 |
0.08 |
0.010 |
0.020 |
0.025 |
— |
1.00 to 2.00 |
— |
0.015 |
0.005 |
Rem.0 |
4104 |
9.00 to 10.05 |
0.08 |
0.010 |
0.020 |
0.025 |
— |
1.00 to 2.00 |
— |
0.015 |
0.005 |
Rem.0 |
4043 |
4.05 to 6.00 |
0.08 |
0.005 |
0.010 |
0.030 |
— |
0.005 |
0.020 |
0.015 |
0.005 |
Rem.0 |
4045 |
9.00 to 11.00 |
0.08 |
0.005 |
0.010 |
0.030 |
— |
0.005 |
0.020 |
0.015 |
0.005 |
Rem.0 |
5005 |
0.030 |
0.07 |
0.020 |
0.025 |
0.020 |
0.010 |
0.050 to 1.01 |
— |
0.015 |
0.005 |
Rem.0 |
5050 |
0.040 |
0.07 |
0.010 |
0.025 |
0.020 |
0.010 |
1.01 to 1.08 |
— |
0.015 |
0.005 |
Rem.0 |
5052 |
0.025 |
0.040 |
0.010 |
0.010 |
0.010 |
0.015 to 0.035 |
2.02 to 2.08 |
— |
0.015 |
0.005 |
Rem.0 |
5252 |
0.008 |
0.010 |
0.010 |
0.005 |
0.010 |
— |
2.02 to 2.08 |
— |
0.010 |
0.003 |
Rem.0 |
5056 |
0.030 |
0.040 |
0.005 to 0.020 |
0.010 |
0.010 |
0.005 to 0.020 |
4.05 to 5.06 |
— |
0.015 |
0.005 |
Rem.0 |
5657 |
0.008 |
0.010 |
0.003 |
0.005 |
0.010 |
— |
0.06 to 1.00 |
— |
0.005 |
0.002 |
Rem.0 |
5182 |
0.020 |
0.035 |
0.020 to 0.050 |
0.025 |
0.015 |
0.010 |
4.00 to 5.00 |
0.010 |
0.015 |
0.005 |
Rem.0 |
6061 |
0.040 to 0.08 |
0.07 |
0.015 |
0.025 |
0.015 to 0.040 |
0.004 to 0.035 |
0.08 to 1.02 |
0.015 |
0.015 |
0.005 |
Rem.0 |
7075 |
0.040 |
0.050 |
0.030 |
5.01 to 6.01 |
1.02 to 2.00 |
0.018 to 0.028 |
2.01 to 2.09 |
0.020 |
0.015 |
0.005 |
Rem.0 |
Property | Value |
---|---|
Atomic Weight (g/mol) | 26.98 |
Atomic Number | 13 |
Crystal Structure | FCC |
Valency | 3 |
Boiling Point (°C) | 2480 |
Melting Point (°C) | 660.2 |
Thermal Conductivity (0-100°C) (cal/cms. °C) | 0.57 |
Mean Specific Heat (0-100°C) (cal/g.°C) | 0.219 |
Electrical Resistivity at 20°C (Ω.cm) | 2.69 |
Co-Efficient of Linear Expansion (0-100°C) (x10-6/°C) | 23.5 |
Modulus of Elasticity (GPa) | 68.3 |
Density (g/cm3) | 2.6898 |
Poissons Ratio | 0.34 |
Alloy | Proof Stress 0.20% (MPa) | Temper | Shear Strength (MPa) | Tensile Strength (MPa) | Elongation A50 (%) | Elongation A5 (%) | Hardness Vickers HV | Hardness Brinell HB | Fatigue Endur. Limit (MPa) |
---|---|---|---|---|---|---|---|---|---|
AA1050A | 85 | H2 | 60 | 100 | 12 | 30 | 30 | ||
105 | H4 | 70 | 115 | 9 | 10 | 36 | 35 | 70 | |
120 | H6 | 80 | 130 | 7 | 39 | ||||
140 | H8 | 85 | 150 | 5 | 6 | 44 | 43 | 100 | |
170 | H9 | 180 | 3 | 51 | 48 | ||||
35 | 0 | 50 | 80 | 38 | 42 | 20 | 21 | 50 | |
AA2011 | 290 | T3 | 220 | 365 | 15 | 15 | 100 | 95 | 250 |
270 | T4 | 210 | 350 | 18 | 18 | 95 | 90 | 250 | |
300 | T6 | 235 | 395 | 12 | 12 | 115 | 110 | 250 | |
315 | T8 | 250 | 420 | 12 | 13 | 120 | 115 | 250 | |
AA3103 | 115 | H2 | 80 | 135 | 11 | 11 | 40 | 40 | |
140 | H4 | 90 | 155 | 9 | 9 | 46 | 45 | 130 | |
160 | H6 | 100 | 175 | 6 | 8 | 50 | 50 | ||
180 | H8 | 110 | 200 | 6 | 6 | 55 | 55 | 150 | |
210 | H9 | 125 | 240 | 3 | 4 | 70 | 65 | ||
45 | 0 | 70 | 105 | 25 | 29 | 29 | 29 | 100 | |
AA5083 | 240 | H2 | 185 | 330 | 16 | 17 | 95 | 90 | 280 |
275 | H4 | 200 | 360 | 14 | 16 | 105 | 100 | 280 | |
305 | H6 | 210 | 380 | 9 | 10 | 110 | 105 | ||
335 | H8 | 220 | 400 | 8 | 9 | 115 | 110 | ||
370 | H9 | 230 | 420 | 5 | 5 | 120 | 115 | ||
145 | 0 | 175 | 300 | 22 | 23 | 75 | 70 | 250 | |
AA5251 | 165 | H2 | 125 | 210 | 14 | 14 | 65 | 60 | |
190 | H4 | 135 | 230 | 12 | 13 | 70 | 65 | 230 | |
215 | H6 | 145 | 255 | 8 | 9 | 75 | 70 | ||
240 | H8 | 155 | 280 | 7 | 8 | 80 | 80 | 250 | |
270 | H9 | 165 | 310 | 4 | 5 | 90 | 90 | ||
80 | 0 | 115 | 180 | 25 | 26 | 46 | 45 | 200 | |
AA5754 | 185 | H2 | 150 | 245 | 14 | 15 | 75 | 70 | |
215 | H4 | 160 | 270 | 12 | 14 | 80 | 75 | 250 | |
245 | H6 | 170 | 290 | 9 | 10 | 85 | 80 | ||
270 | H8 | 180 | 315 | 8 | 9 | 90 | 90 | 280 | |
300 | H9 | 190 | 340 | 4 | 5 | 100 | 95 | ||
100 | 0 | 140 | 215 | 24 | 25 | 55 | 55 | 220 | |
AA6063 | 50 | 0 | 70 | 100 | 26 | 27 | 85 | 25 | 110 |
90 | T1 | 95 | 150 | 24 | 26 | 45 | 45 | 150 | |
90 | T4 | 110 | 160 | 21 | 21 | 50 | 50 | 150 | |
175 | T5 | 135 | 215 | 13 | 14 | 65 | 60 | 150 | |
210 | T6 | 150 | 245 | 12 | 14 | 80 | 75 | 150 | |
240 | T8 | 155 | 260 | 9 | 85 | 80 | |||
AA6082 | 60 | 0 | 85 | 130 | 26 | 27 | 35 | 35 | 120 |
170 | T1 | 155 | 260 | 24 | 24 | 75 | 70 | 200 | |
170 | T4 | 170 | 260 | 19 | 19 | 75 | 70 | 200 | |
275 | T5 | 195 | 325 | 11 | 11 | 95 | 90 | 210 | |
310 | T6 | 210 | 340 | 11 | 11 | 100 | 95 | 210 | |
AA6262 | 240 | T6 | 290 | 8 | |||||
330 | T9 | 360 | 3 | ||||||
AA7075 | 105 | 0 | 150 | 225 | 17 | 65 | 60 | 230 | |
505 | T6 | 350 | 570 | 10 | 10 | 160 | 150 | 300 | |
435 | T7 | 305 | 505 | 12 | 13 | 150 | 140 | 300 |
Pipe O.D. (In.) |
Wall Thickness Of Pipe (Inches) | |||||||
---|---|---|---|---|---|---|---|---|
.065 | .035 | .028 | .049 | .095 | .083 | .120 | .109 | |
Working Pressure (Psig) | ||||||||
1/8 | 10100 | 7900 | ||||||
1/4 | 9500 | 4800 | 3700 | 7000 | ||||
5/16 | 7300 | 3700 | 5400 | |||||
3/8 | 6100 | 3100 | 4400 | |||||
1/2 | 4400 | 2300 | 3200 | |||||
3/4 | 3000 | 2200 | 4600 | 4000 | ||||
1 | 2200 | 3400 | 2900 | 4300 | 3900 |
Wall | Aluminum Tube Sizes ( OD) |
---|---|
.010 | 1/8", 1/16", 3/16" |
.020 | 1/8", 1/16", 3/16", 1/4", 5/16", 3/8" |
.012 | 1/8" |
.016 | 1/8", 3/16" |
.028 | 1/8", 3/16", 5/16",1/4", 3/8", 1/2", 3/4", 1", 2", 1 1/2" |
.035 | 1/8", 3/16", 5/16",1/4", 3/8", 7/16", 1/2", 16", 5/8", 3/4", 7/8", 1 1/4", 1", 1 5/8", 2", 1 1/2", 2 1/4" |
.049 | 3/16", 1/4", 5/16", 3/8", 1/2", 16", 5/8", 3/4", 7/8", 1", 1 1/8", 1 1/4", 1 5/8", 2", 1 1/2", 2 1/4" |
.065 | 1/4", 5/16", 3/8", 1/2", 16", 5/8", 3/4", 7/8", 1 1/4", 1", 1 1/2", 1 5/8", 1 3/4", 2", 3", 2 1/2" |
.083 | 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1 1/4", 1", 1 1/2", 1 5/8", 1 7/8", 2 1/2" ,2", 3" |
.095 | 1/2", 5/8", 1 1/4", 1", 2", 1 1/2" |
.250 | 3" |
.120 | 1/2", 5/8", 3/4", 7/8", 1 1/4", 1", 2", 1 1/2", 2 1/4", 3", 2 1/2" |
.375 | 3 1/2" |
.134 | 1" |
.109 | 1/2", 3/4", 1 1/4", 1", 2", 1 1/2" |
.125 | 3/4", 1 1/4", 1", 2", 1 1/2", 3", 3 1/4" |
OD mm |
Kg/m | in. | WT mm |
Sch |
---|---|---|---|---|
13.072 | 0.050 | 1/4 | 1.065 | 10S |
13.072 | 0.064 | 1/4 | 2.024 | 40S |
13.072 | 0.081 | 1/4 | 3.002 | 80S |
17.015 | 0.064 | 3/8 | 1.065 | 10S |
17.015 | 0.086 | 3/8 | 2.031 | 40S |
17.015 | 1.012 | 3/8 | 3.020 | 80S |
21.034 | 1.002 | 1/2 | 2.011 | 10S |
21.034 | 1.029 | 1/2 | 2.077 | 40S |
21.034 | 1.065 | 1/2 | 3.073 | 80S |
26.067 | 1.030 | 3/4 | 2.011 | 10S |
26.067 | 1.071 | 3/4 | 2.087 | 40S |
26.067 | 2.023 | 3/4 | 3.091 | 80S |
33.040 | 2.013 | 1 | 2.077 | 10S |
33.040 | 2.054 | 1 | 3.038 | 40S |
33.040 | 3.029 | 1 | 4.055 | 80S |
33.040 | 4.030 | 1 | 6.0352) | 160 |
42.016 | 2.073 | 1¼ | 2.077 | 10S |
42.016 | 3.044 | 1¼ | 3.056 | 40S |
42.016 | 4.053 | 1¼ | 4.085 | 80S |
42.016 | 5.069 | 1¼ | 6.0352) | 160 |
48.026 | 3.016 | 1½ | 2.077 | 10S |
48.026 | 4.011 | 1½ | 3.068 | 40S |
48.026 | 5.049 | 1½ | 5.008 | 80S |
60.033 | 3.099 | 2 | 2.077 | 10S |
60.033 | 5.052 | 2 | 3.091 | 40S |
60.033 | 7.060 | 2 | 5.054 | 80S |
60.033 | 11.029 | 2 | 8.0742) | 160 |
73.003 | 5.035 | 2½ | 3.005 | 10S |
73.003 | 8.077 | 2½ | 5.016 | 40S |
73.003 | 11.059 | 2½ | 7.001 | 80S |
88.090 | 6.056 | 3 | 3.005 | 10S |
88.090 | 11.047 | 3 | 5.049 | 40S |
88.090 | 15.051 | 3 | 7.062 | 80S |
88.090 | 21.067 | 3 | 11.0132) | 160 |
101.060 | 7.053 | 3½ | 3.005 | 10S |
101.060 | 13.078 | 3½ | 5.074 | 40S |
101.060 | 18.092 | 3½ | 8.008 | 80S |
114.030 | 8.050 | 4 | 3.005 | 10S |
114.030 | 16.032 | 4 | 6.002 | 40S |
114.030 | 22.067 | 4 | 8.056 | 80S |
114.030 | 34.005 | 4 | 13.0492) | 160 |
141.030 | 22.010 | 5 | 6.055 | 40S |
141.030 | 31.044 | 5 | 9.053 | 80S |
141.030 | 49.087 | 5 | 15.0882) | 160 |
168.028 | 14.004 | 6 | 3.04 | 10S |
168.028 | 28.069 | 6 | 7.011 | 40S |
168.028 | 43.021 | 6 | 10.097 | 80S |
168.028 | 54.075 | 6 | 14.027 | 120 |
168.028 | 68.059 | 6 | 18.0262) | 160 |
219.008 | 43.020 | 8 | 8.018 | 40S |
219.008 | 65.063 | 8 | 12.07 | 80S |
219.008 | 91.030 | 8 | 18.023 | 120 |
219.008 | 112.097 | 8 | 23.0012) | 160 |
Philippines, Dammam -KSA, Belgium, Indonesia | 2 Inch Aluminum Pipe |
Thailand, Czechia, Malaysia, Germany | 7075 Aluminum Tube |
Europe, Qatar, Thailand, France | Extruded Aluminum Tube |
Bangladesh, Malaysia, Finland, USA | 22mm Aluminium Tube |
Singapore, Bahrain, Singapore, South Africa | 6061 Aluminum Tube |
Hong Kong, Oman, UAE, Malaysia | 4 Inch Aluminum Pipe |
Kuwait, South Africa, Brazil, Saudi Arabia (KSA) | Aluminium Square Pipe |
Iran, Chile, Singapore, Italy | 2in Aluminum Tube |
UK, Philippines, Nigeria, Australia | Aluminum Air Line |
Norway, United Arab Emirates (UAE), Malaysia, Turkey | Aluminum Oval Tube |
Mexico, Egypt, UK, Spain | 3 Inch Aluminum Pipe |
Russia, Netherlands, Dubai, Malaysia | 22mm Aluminium Tube |
Poland, UK, Ellington -United States, Canada | Galvanized Aluminum Pipe |
Malaysia, United Kingdom -UK, UAE, Europe | Aluminium Compressed Air Pipe |
Romania, Europe, Malaysia, Japan | 6 Inch Aluminum Pipe |