Aluminum Bronze Compression Tube Fittings
- Home /
- Aluminum Bronze Tube Fittings
Aluminum Bronze Tube Fittings Sizes in Stock
| Tube Fittings Types | Size OD | Size Inch |
|---|---|---|
| Tube To Union | 6mm to 38mm | 1/4" to 1 1/2" |
| Tube to Male Fittings | ||
| Tube to Female Fittings | ||
| Tube to Pipe Fittings | ||
| Tube Fittings Accessories |
Specification List Of Aluminum Bronze Ferrule Fittings
Types |
Tube to Union, Tube to Male, Tube to Female, Instrument Pipe Fittings, Accessories |
|---|---|
Equivalent To |
SWAGELOK, PARKER, DK-LOK, HOKE |
Grade |
AB1, AB2
|
Sizes |
1/8’’ to 2’’ and 3mm to 50mm |
Ends |
Threaded, Welding, JIC |
Pressure Rating |
1000 Psi, 3000 Psi, 6000 Psi, 10000 Psi |
Threads |
NPT , BSPT, BSPP |
Aluminum Bronze Compression Fittings Mechanical Strength
| Properties | Metric | Imperial |
|---|---|---|
| Hardness, Rockwell C | 27 | 27 |
| Tensile strength (M30 and O61 tempers) | 690 MPa | 100000 psi |
| Yield strength (M30 and O61 tempers) | 380 MPa | 55100 psi |
| Elongation at break (in 50 mm, 1% reduction in area) | 1.00% | 1.00% |
| Elastic modulus | 117 GPa | 17000 ksi |
| Compressive yield strength (at permanent set of 0.1%) | 450 MPa | 65300 psi |
| Compressive yield strength (at permanent set of 1%) | 880 MPa | 128000 psi |
| Poisson’s ratio | 0.34 | 0.34 |
| Charpy impact (@ 18.0 - 100°C/ -0.400 - 212°F, keyhole) | 3.00 J | 2.21 ft-lb |
| Izod impact (@ 18.0 - 100°C/ -0.400 - 212°F) | 3.00 J | 2.21 ft-lb |
| Fatigue strength (@# of cycles 1.00e+8, M30 temper) | 460 MPa | 66700 psi |
| Machinability (UNS C36000 (free-cutting brass) = 100) | 20 | 20 |
| Shear modulus | 42.3 GPa | 6140 ksi |
Chemical Compatibility Of Aluminum Bronze Tube Fittings
| Element | Content (%) |
|---|---|
| Copper, Cu | 82.7 |
| Aluminium, Al | 12.5-13.5 |
| Iron, Fe | 3.5-5.0 |
| Manganese, Mn | ≤2.0 |
| Other | ≤0.5 |
Aluminum Bronze Compression Tube Fittings Physical Properties table
| Properties | Metric | Imperial |
|---|---|---|
| Density | 7.21 g/cc | 0.260 lb/in³ |
| Melting point | 1047°C | 1917°F |
Do You Know Key Properties of Aluminum Bronze Tube Fittings ?
- This alloy group offers higher tensile strength and resistance compared to other alloys of Bronze.
- These alloys are non-magnetic.
- They are resistant to tarnish.
- They experience low oxidation rates at high temperatures.
- The alloys under this category show low reactivity to sulfurous compounds and other products of combustion.
- These alloys are resistant to sea water
Fabrication Properties of Aluminum Bronze Double Ferrule Fittings
| Joining Technique | Suitability |
|---|---|
| Soldering | Good |
| Brazing | Good |
| Oxyacetylene Welding | Not Recommended |
| Gas Shielded Arc Welding | Good |
| Coated Metal Arc Welding | Good |