Alloy 20 Needle Valve
- Home /
- Alloy 20 Needle Valve
Specification And Material Grade Of Alloy 20 Hydraulic Needle Valve
| BRAND NAME | TU-LOK |
| VALVE SIZE | 1/8" TO 2" / 6 MM TO 50 MM |
| THREAD | NPT, BSPP, BSPT, JIC, METRIC, UNF |
| CONNECTION | THREADED, TUBE END, BUTT WELD, SOCKET WELD, FLANGE END |
| FLOW PATTERN | STRAIGHT, ANGLE, CROSS PATTERNS |
| FUNCTION | 2 WAY, 3 WAY |
| BODY SHAPE | SQUARE, ROUND, HEXAGON |
| PRESSURE RATING | 1500 PSI, 3000 PSI, 6000 PSI, 10000 PSI, 15,000 PSI, 20000 PSI |
| ORIFICE SIZE | 2 MM TO 9.5 MM |
| MEDIA | HYDRAULIC OIL, AIR, WATER, GAS, STEAM, HOT WATER , COLD WATER , SEA WATER , CHEMICAL |
| MEDIA TEMPERATURE | (-120* C TO 500*C ) RANGE AS PER PRESSURE |
| BODY TYPE | BAR STOCK, FORGED |
| HANDLE | BAR T-HANDLE,KNOB HANDLE, WHEEL HANDLE |
| PACKING DETAILS | BOX PACKING, WOODEN PALLET |
| EQUIVALENT BRANDS | SWAGELOK, PARKER, DK-LOK, HAMLET, OLIVER VALVES, HOKE |
| MATERIAL | ALLOY 20 |
Carpenter 20 Alloy Flow Control Needle Valve Range
ALLOY 20 VALVES
COMPRESSION ALLOY 20 NEEDLE VALVE
HIGH PRESSURE ALLOY 20 NEEDLE VALVE
INSTRUMENTATION ALLOY 20 NEEDLE VALVE
LOW PRESSURE ALLOY 20 NEEDLE VALVE
Alloy 20 High Temperature Needle Valve Datasheet
Equivalent Material Properties Of 2.4660 Instrumentation Needle Valve
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
| Alloy 20 | N08020 | 2.4660 | Z2NCUD31-20AZ | NiCr20CuMo | - | - | - |
Composition Table Of UNS N08020 Compression Needle Valve
| Grade | % | Ni | Cr | Mo | Cu | Nb | C | Mn | Si | P | S |
| Alloy 20 | Min. | 32 | 19 | 2 | 3 | 0.1 | 1 | ||||
| Max. | 38 | 21 | 3 | 4 | 0.3 | 0.02 | 2 | 0.7 | 0.02 | 0.005 |
Mechanical Strength Table Of Carpenter 20 Pneumatic Needle Valve
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Alloy 20 | 8.1 g/cm3 | 1443 °C (2430 °F) | Psi – 80000 , MPa – 551 | Psi – 35000 , MPa – 241 | 30 % |